Zelda props, printable.

I added a edge border wall to the coaster for those that want to contain liquids for excess condensation!

The license for this design is non-commercial, no one may sell any version of this design with the exception of…

Zelda Link sword wall art

This is a small replica of the breakable pots in Zelda: OOT along with some of the items you can find in them.

Here is my version of the Kokiri Sword from Ocarina of Time as requested by you all. V2, corrected slotting

Make delicious cookies in the shape of the Triforce, the central motif of The Legend of Zelda series!

Princess Zelda

Here is the Wind Waker, used to summon the winds in The legend of Zelda Wind Waker

Ikea Skadis mount for the modern Super Mario Bros and The Legend of Zelda Nintendo Game & Watch handheld consoles.

These are for those struggling to assemble my Master Sword due to tight tolerances. These alt. pieces may require glue.

Thingiverse oboka's model put through Meshmixer's "Make Solid" and Netfabb's "Repair", which corrected a few flaws.

Custom lithophane stand included. Software used: Photoshop, Blender, Meshmixer, S3D.

A Zelda themed gyro that can be worn around your neck, hanged as decoration, ... . A perfect conversation starter!

Scimitar of the Seven : Legend of Zelda : Tears of the Kingdom

Just a simple Triforce. Because who doesn't want a Triforce???

A custom accessibility adapter for the Nintendo Switch's Joy-Cons in the shape of a Sheikah Slate

A model I made for the release of the anniversary of Zelda this year Check out my insta for more projects:…

I made a Remix of my Bokoblin BIG SIZE Chest.

https://www.youtube.com/watch?v=BNUuwJpeilM Read the full guide on: https://learn.adafruit.com/breath-of-the-wild-…

38mm scale miniatures of the lizalfos as they appear in Tears of the Kingdom and Breath of the Wild.

Zelda master sword bookmark

This is a remix to the master sword wallmount

a little something to put on display :)

Even the mighty Prince of the Zoras was once a helpless hatchling

Hyrule map from Breath of the Wild with frame Assembly required

A 3D model of the treasure chest from BotW with a removable Switch cartridge holder (read description)

Supportless 30 min print

Zelda breath of the wild Z logo with sword

There are a lot of Rupee models out there, but I wanted one that was a little larger and also a way to display it/them.

Original Link model provided by Peter Farell had some artifacts, holes, and other oddities. I removed and simplified.

A guardian from BOTW

Zelda BOTW divine beast keychains

Zelda Master Sword Plant Trellis - No supports or adhesion needed

ZELDA DOUBLE BIT: LINK (TEARS OF THE KINGDOM)

A remix - just colored in Bambu Studio. Please post your makes, it will make me happy! :)

An alt version of my Master Sword blade. These pieces can be printed instead of Blade Pieces 2-6 from my original design

Inspired by topographic models of mountains I decided to do something fun. Generated in Blender using a height map

Legend of Zelda: Tears of the Kingdom art based on the Complete Official Guide cover.

Just a mashup of an icon from Zelda Breath of the Wild.

has a secret storage inside ☘

This is a Korok whose backpack doubles as a coin bank.

Zelda Healing Fairy

🐔 Miniature of the most famous town in the classic N64 game, to scale to our other models. MMU version available

This is a Zelda key holder.

This is a remix of Lurgnarb's model with added hinges and Switch cartridge holder. Optimized for MMU.

I Remixed The Hookshot fromhttps://www.myminifactory.com/object/3d-print-ocarina-of-time-hookshot-11032

Popandsicle’s free Master Sword is the best Master Sword model I know. This remix will make the wings look canonical!

A 3d / curved top face Hylian Shield for 10 switch games. Holes for 6x3mm magnets in both case and lid.

A Moblin from their appearance in Zelda Tears of the Kingdom with an amiibo style base.

A unique and stylish lamp, modeled after one of the most valuable and precious resources in the entire kingdom of Hyrule

First I want to give props to fasteddy516 for the inspiration. File and Prints of models not to sell or resale This was…

Full Scale Fierce Deity Sword From The Legend Of Zelda

Link From Zelda

⛪⏳ Interior of the classic building from the N64 Zelda game. MMU ready.

A small version of The Master Sword from The Legend of Zelda Breath of the Wild.

This is a remix of : https://www.thingiverse.com/thing:1449187 Hi, I modified the sword made by @ChaosCoreTech I made…

Drinks coaster with Zelda Majora's Mask Moon design.

If you've printed my Master Sword and Master Sword Scabbard, now you can display them in style!

This guitar is modified from the original Prusacaster design with some design tweaks and other minor fixes.

I've had several requests for a single piece blade for my Master Sword design. This will be perfect for belt printers!

One of the divine beasts that you find in BOTW You may need to scale it up a lot so that the kit card isn't too fragile

Mini octopus with a Zelda Guardian top

You can glue a 10 x 1.5 mm round magnet in the base.

Blue Flame Pedestal Zelda

I had a hard time printing greggo's Customizable Korok so I just cut it in half at a place that was easy to print with…

Multicolour Master Sword

A guardian turret with optional extension, from Zelda Breath of the Wild.

The "Z" from the recent zelda games

A mashup of @Popandsicle's excellent BOTW Master Sword Hilt and @xenonjibei's TOTK Corrupted Blade!

38mm scale miniature of Volvagia, the subterranean lava dragon.

Here's my version of the master sword from TotK. It's split for smaller printing, uses a 1/2 in dowel for strength. I…

Zelda BOTW Guardian action figure

I designed this button for a pouch I made and thought others might like to have a triforce button.

a colored remix for the broken master sword

A lamp bearing the Sheikah Eye Symbol.

The mastersword from the legend of zelda

Wanted a key with the Triforce in it for Halloween costume.

Articulated, stands 19 cm tall, scales well with other figures.

A Chuchu

The ultimate accessory for Zelda fans. A 3D printable emblem that can be attached or hung anywhere.

This is a Heart Container from the legend of Zelda Breath of The Wild with models for single and multi color printers.

Creepy fountain monster from the N64 Zelda game, no supports. Works as a fridge magnet too!

Large Majoras Mask

super fun to fidget with. best to put a layer of glue stick before you do it so it will not stick as much to the plate

Zelda Hylia shield sub-assembly model

Just a repost of https://www.thingiverse.com/thing:5988140 Because I couldn't find one on printables.

A bookmark that shows the sword from the Zelda games on the outer face and which uses a fin to separate a book's pages.

3 fun variations to help you pass the time until TotK comes out :)

The corruped Master sword seen in the trailer for BOTW 2

These coasters with emblem of the KSP designed by VulshokBersrker and modified into an MMU print

Link Trophy: Legend of Zelda : Super Smash Bros.

Additional masks for your Korok prints!

Hey, this is a ruby from Zelda. To print it as an earring, set it to 25% in your slicer. No particular print settings,…

Earrings in the shape of the The Legend of Zelda Triforce artifact. Power, Wisdom, Courage! Print one for each ear!

🌋 Miniature of a volcano location from the Nintendo 64 game.

A Legend of Zelda inspired bookmark, designed for fast (36min) and thin (0.3mm total) printing

The print is colored for 4 material print. Can be printed with the Bambu Lab AMS.

remix for a zelda theme

Triforce light made with LED noodle (https://www.adafruit.com/product/5503), printed on Prusa i3 mk3.

3D printed Stand does give the Nintendo Switch a unique aura

Addressed issues w/ spikes for ReProps's "Majora's Mask from Legend of Zelda" including peg location, orientation, etc.

Box for 25 cards. I use it to store NFC215 tags, which i have as a 'replacement' for Amiibo's The box is Zelda themed

Hylian Shield edges and embellishments split in pieces small enough to print on MK3 bed.

The Legend of Zelda: Majora's Mask

the boss key from the legend of Zelda Wind waker

This is a sculpted replica of the Guidance Stone from Legend of Zelda BOTW.

Zelda Master Sword with runes.

A Tears of the Kingdom Secret Stone Keychain/Earrings/Jewelry

A bokoblin from their appearance in The Legend of Zelda Breath of the Wild with an amiibo style base.

A lighter case specifically designed to fit your standard sized Bic lighter with the Hyrule Crest'

These are Purah's goggles with holes for LEDs, slot for a coin battery, and loops to attach string. The geometry is…

A Scabbard for my 3D Printed Master Sword design. Designed specifically for my Master Sword design, it's a perfect fit!

This is a custom Lynel Themed keyring.

Made a couple of dungeon keys for the children to play with.

Zelda Triforce Coaster

Bring the magic of Zelda: Echoes of Wisdom into your home with this beautifull

A bag tag shaped like the Sheikah Slate from BOTW

Máscara Keaton de la saga de The Legend Of Zelda, concretamente de Majora's Mask y Ocarina Of Time.

Zelda wall art: where elegance meets the gaming realm!

Remix of the Bokoblin Chest with slots for 10 Nintendo Switch game cartridges

A Switch Cartridge container in the shape of the iconic chest from BotW. Can be printed on regular printer.

This Zelda-themed triangular trick box has a hidden latch mechanism.

A better JoyCon Grip than the original due to more ergonomic Design. This is a remix from death4u's Xbox JoyCon Grip.

Found a ripped model from Breath of the Wild's game files and cut em in halfs and quarters for ease of printing!

A Giant Brightbloom Seed from Zelda : Tears of the Kingdom. I made mine glow in the dark after the lamp goes off :).

Build a Master Sword from the Legend of Zelda series with Feather RP2040 PropMaker, NeoPixel LEDs and CircuitPython!

The is the Hylian shield

Broken/infected Master Sword as shown on some Legend of Zelda: TotK trailers.

Zelda Breath of the Wild logo wall art

Bust of Ganondorf from Tears of the Kingdom

A key designed based on artwork from The Legend of Zelda; Tears of The Kingdom.

The dark master sword….

This is a 3D model of a Zelda Bracelet inspired by Princess Zelda's jewelry. The design is flat and can be printed…

Royal Guard's Sword and Royal Broadsword from The Legend of Zelda: Breath of the Wild

The Nightmare keys featured in Ocarina of Time for the Nintendo 64

This is a basic tissue box inspired by Zelda Tears of the Kingdom

https://www.youtube.com/watch?v=hJsw8k0eir4 Rejoins nous : https://www.facebook.com/groups/492474174608397/

🏰 Easy-to-print miniature of the iconic royal castle from Nintendo 64 game.

This is a remix of IXPatch's excellent remix of Crafty Sven's excellent articulated guardian, with detachable arms.

This version of the Master Sword prints-in-place all as one part

A simple toy sword designed from The Legend of Zelda - Breath of the Wild game.

A statue from BOTW

A Little Zelda Rupee Button

master sword bookmark from legend of Zelda

a pedestal for the master sword by @Popandsicle

A child sized, child safe Master Sword the video games series Legend of Zelda

The most accurate model of it that you'll find.

A Tri-force styled base to store/display the Master Sword bookmarks that you have printed.

Remix with a Zelda twist!

I would love to keep sharing my projects with all of you.

i did this because it looked cool on the photo. i used tinkercad and nomad sculpt, im not good at it. if you have some…

A favorite creep location in The Legend of Zelda: Ocarina of Time, full of tiny details!

Ganondorf, ripped from Smash bros Brawl.

Trefoil knot that looks like the triforce from directly above.

My kids loved the Pool Noodle handle someone made, and we all love Zelda. So I combined the two.

I made this in nomad sculpt and its based on Zelda from Echoes of wisdom All right go to Nintendo.

A pretty display case to hold all 25 (current) Zelda Amiibo in card form

This is a quick model of the Zonai charge from Zelda TOTK. I am not sure if the parts fit yet, so please print it and…

A colourised version of Link's shield

LOZBTW the master sword

Tears of the Kingdom characters. Come with and without a platform.

Zelda Boss Key keychain or Necklace, model without the "adapter" also included

Majoras Mask HD from The Legend of Zelda

Ganon from Zelda

The Fierce Deity Sword: Majora’s Mask, Hyrule Warriors, Breath of the Wild, Tears of the Kingdom. FULL SIZE!

I thought the original stand was a little bland, so I added a triforce to zelda-it-up.

Zelda Triforce Button

Hueforge Link Zelda

Zelda Tears of the Kingdom Lithophane ceiling lamp

Large support free planter inspired by decayed ancient guardians scattered around Hyrule in Breath of the Wild !

Remixed the heart posted by @Squirrelbrain to be a wall display

Loved the Zelda box so created an Hylian Shield Remixed lid for it

Zelda silhouette ornaments Very easy to print, no supports needed, the back slots into place securely.

This is a remix of Llaurik's The Legend of Zelda: Hyrule Crest Keychain which has been cut into separate parts for…

Simple Triforce with Goddess Symbols inspired by Zelda, double sided, prints flat. Fusion file included.

Two support pieces to display Adafruit's Guardian Sword Design.

Dock decoration with storage for your game cartriges | Déco pour dock avec rangement pour disquettes de jeux

A simple base for who like me didn't know where to put an entire sword but still wanted to print this beautiful model.

Childhood-destroying, life-scarring, nightmare-inducing dungeon of The Legend of Zelda: Ocarina of Time

A button that does not require sewing to attach and includes a Master Sword clasp with the Triforce symbol.

A custom designed set of stones and capstone for the game of Tak, design inspired by art from Zelda: BotW

Easy to print and designed to have a Simple Zelda Theme

🧊 Recreation of some push blocks found in puzzles in The Legend of Zelda video game series. Easy prints.

https://www.youtube.com/watch?v=qhtbJz2hEps Read the full guide on: https://learn.adafruit.com/zelda-thunder-…

Ein kleiner Ständer für Nintendo Switch Joycons

The Legend of Zelda: Breath of the Wild themed coaster

Majora's Mask from Legend of Zelda, for printing in multicolour

🏜 Stunning entrance to the Spirit Temple in The Legend of Zelda: Ocarina of Time.

A fully 3D printed 1:1 scale Master Sword prop from The Legend of Zelda: Breath of the Wild.

Ball and chain weapon from The Legend of Zelda The Twighlight Princess.

Coaster and Holder

Vertikal wall hanger for the fully 3D printed 1:1 scale Master Sword prop from The Legend of Zelda: Breath of the Wild.

sheikah slate, easy to print

Zelda TOTK cover dock Nintendo Switch

Whats your favorite weapon from the Zelda games? I guess you know whats ours 😉

Chest with 22 slots

This model is compatible with the lego system.

commemorative trophy for finding all 900 koroks in Zelda BOTW. All parts are also availabl separate to make it your own.

Figurine of Link from Zelda II: The Adventure of Link

Forest Dweller’s Sword

3D printable Master Sword stand with Triforce art.

Kit card for Legend of Zelda Korok

Here's my version of Tri, Zelda's floating companion in The Legend Zelda: Echoes of Wisdom.

I modified the top to make it a stand for a Game and Watch.

A printbed scraper with the Tears of the kingdom pattern.

A mechanically functioning Hookshot that actually fires.

This is a model of the Hylian Shield from The Legend of Zelda: Breath of the Wild made specifically for multi-extruder…

Snugly snap mini amiibo cards into holders with keyring

A simple stand for the Zelda Master Sword

An extremely rough logo of The Legend of Zelda: Breath of the Wild. I say rough because the mesh isn't perfect, but it…

Rauru Zonai Statue : Zelda

It's the rupee from Legend of Zelda! Print in your favourite color

Majora's PPE Mask Original

A triforce you can clip to hair with a bobby pin.

For the guardian sword of Zelda I designed a pedestal.

A remix of Majora's Mask that is optimized for the snapmaker U1.

a zelda inspired bookend

A simple wall art for the Zelda series

A bookend featuring the sword and shield from Legend of Zelda

Simple box for BOTW cards which closes securely while still being easy to open

Wall-mounted Hylian Wingcrest from the Legend of Zelda series

Fit for a princess

Hello! I'm excited to present to you all, my model of Link, from The Legend of Zelda: Link's Awakening

A Breath of the Wild tower for rolling dice

Keychain featuring the Triforce from the game Legend of Zelda

Go to home depot and get some 0.3in x 0.11in magnets, SKU#631954. Put them in the rupee, super glue em together and…

Here is a quick make of the heros bow from majoras mask, it includes a notch to fit an arrow as well as holes for string

Illuminate your Legend of Zelda adventure with this LED Zelda Master Sword Remix. Easy to print, paint and assemble!

My new YouTube Channel: https://www.youtube.com/channel/UCnnw56J\_TeOsF4M\_F5pPPJQ Oh Yeah!

⛪⏳ Updated & improved miniature of the building from the N64 game & Zelda franchise.

A Bokoblin. You can support me on https://www.patreon.com/Schlossbauer if you like my work.

The master cycle from Zelda Breath of the wild with an amiibo style base

ALegend of Zelda Triforce Cookie Cutter. Have fun!

I have to admit that I never even played Zelda. Thank you @fasteddy546 for the design for this shield. I just wanted…

I made a Remix of IXPatch Bokoblin Chest

A D20 inspired by the Legend of Zelda TriForce

Low-poly Master Sword and Hylian shield from the Legend of Zelda series. Made to match the style of the Dummy 13 figure.

This is my take on deku tree and I wanted to make it a bit useful so you can display your rings in its branches.

Petite modélisation du bouclier de Link, dans Zelda Twilight Princess, de Wii, dans une version porte-clés. Merci…

With a download and a like you help us a lot to continue designing free models for the community. Thank you very much!!

A Light box of Majora's Mask from The Legend of Zelda series.

Simple model of a Skulltula, a classic spider enemy from the Zelda series, no supports. Fridge magnet version included.

Ganondorf from his appearance in The Legend of Zelda the Wind Waker with an amiibo style base.

An MMU print for a the Hylian Shield and a stand

A FDM friendly, rotating Guardian with minimal supports.

Needs supports, but it's still pretty cool. You probably want to print it big though.

A lighter case designed to fit your standard size Bic lighter adorned with Zelda: Tears of the Kingdom symbol.

Divine Beast keychains from Zelda made using artwork from HW:AoC

Master Sword Pencil Topper

This is a exact recreation of the Treasure Chest which was a Bonus Item of the The Legend of Zelda: A Link Between…

I added a hook to easily hang from

Hylian Shield inspired wall mount for the Master Sword

For use to add to other models such as the Switch comfort grip in the pic.

⚔🛡 Majestic Majora's Mask with a stained glass, polygonal aesthetic. Cheers! http://thebrew.shop

it is a nintendo switch dock

Hey! Listen! It's Navi from The Legend of Zelda: Ocarina of Time in hanging ornament form.

https://www.youtube.com/watch?v=BxlorGcJpZE In this project, we're 3d printing Link's Hylian Shield from Zelda.

Goddess Statue TOTK (The one in the Temple of Time)

Legend of Zelda Breath of the wild - phone holder

Lizalfos from their appearance in Zelda Breath of the Wild with an amiibo style base.

38mm scale miniatures of the lizalfos as they appear in Tears of the Kingdom and Breath of the Wild.

I designed this after the master sword in Twilight Princess. It uses a 1/2" PVC pipe as reinforcement.

My version of Link's Master Sword

Remix of my Master Sword sized for Dummy 13

Hyrule Castle Pot The Legend of Zelda: Echoes of Wisdom

Five models from Breath of the Wild/Tears of the Kingdom. Can be used for keychains or jewelry. NOW UPDATED.

Here is yet another Legend of Zelda Key, this time from Twilight Princess.

Legend of Zelda Hylian Shield Keychain

For the release of Zelda - Tears of the Kingdom, I propose you to customize your nintendo Switch!

Link's Boomerang from Ocarina of time

Rupees from A Link to the Past, Tears of the Kingdom, and many games in-between

4 Korok masks & bodies allow for up to 16 combinations! Print & hide them around for others to find, or to help spruce…

Small and friendly guardian pot for your table or plants 😊

Majora's Mask model remixed to have flat back and option for embedded magnets

Master Sword. Lightly based from OOT.

A bookmark modeled after the Master Sword, from The Legend of Zelda.

塞尔达（Zelda）、

i needed this sword as one piece for another project has nothing to do with the anime one piece im sorry i couldnt…

A sword once wielded by a hero in an ancient age. When grasped, a strange sense of nostalgia washes over you. Take it…

Fi, the Sword Spirit who resides in the Master Sword

A 3D map of the map from the video game The Legend of Zelda: A Link to the Past, Dark World version.

made a triforce insert for Legend of Zelda Master Sword (BOTW) (Full Scale) . print 6 and super glue on.

A lamp bearing the Zonai Eye Symbol.

Stand for the Zelda A Link To The Past Map

A Hyrule shield from the Legend of Zelda. Designed to replace the cover of a normal pop socket. Remix of…

Simple topple toy that looks like a Korok from Zelda series

A small guardian used as a trial of strength.

This is a remix of Crafty Sven's excellent articulated Guardian. Just like the original, it prints without supports.

Edit: It turns out some of these files weren't slicing correctly in Slic3r, so I've corrected the issues and updated…

Simple flat model of Link's shield with a bit of relief.

Display your Legend of Zelda Nintendo Switch case

Link's shield form the Legend of Zelda 12'' high by 10''wide. All in multiple easy to glue parts, so nosanding or paint.

Couldn't find a OoT small key model with the old-school polygonal look (nor a rip of the original model), so I made my…

Fun and stylish way to show your love of The Legend of Zelda.

I wanted to hang my Guardian Shield+ next to my Guardian sword. So I came up with a quick design for a wall mount.

A size 8 signet ring with The Legend Of Zelda logo! Any question of feedback ? Pls ask in the comments. Thank you

If you print at 0.2 layer height, you'll get the same pattern as in the pictures. Below 0.2, the pattern changes, and at

Amiibo figures of all 9 Korok variants. All remade by hand using the original game files.

https://youtu.be/SOKDACuJSqY In this project we built the ancient bladesaw from Zelda, Breath of the Wild.

Horizontal Triforce Stand for Popandsicle's TOTK/BOTW Master Sword

A stylized wingcrest from the Legend of Zelda with spinning triforce; both keychain- and earring- sized designs.

Shrine of light from LoZ: Tears of the Kingdom. Place your Switch cartridge inside! Comes with an electronics bay.

From the Legend of Zelda game fan machine model, transformed into a handheld fan,

34mm tall Korok seed, best to print in gold PLA

Korok from Legend of Zelda Breath of the Wild and Tears of the Kingdom

This is a hanging ornament based on the Sheikah symbol from The Legend of Zelda: Breath of the Wild.

I was bored so i modeled the captain construct 1 horn. I hope you like it. Feel free to leave a comment on what I…

A simple stand for the Zelda: Breath of the Wild - 3D Printed Guardian Sword with NeoPixel LEDs created by Adafruit.

No supports, multi-part assembly, all parts print and are put together easily.

Stencil for Hyrule Royal Family Crest.

lithophane Poster Legend of Zelda Great Wave Off Kanagawa Nintendo Voici un lithophane d'un magnifique poster de…

You can glue a 10 x 1.5 mm round magnet in the base.

Zelda TotK Coaster

keychains based of the runes in TOTK

The Light Dragon!

Skull Kid!

This is a wall mount to go with Popsicle's excellent Master Sword design.

3 variants of the cute Korok ! Yahaha ! 🌿

Master sword with a telescoping/collapsing blade. The blade pieces can be replaced as the top of the pommel screws off.

(UPDATED) Princess Zelda from The legend of Zelda: Breath of the Wild.

Here is another small key from Zelda, this time from Skyward Sword.

Game & Watch stand for the Zelda edition

Simply printable logo of Zelda Tears of the Kingdom.

⛪⏳ Miniature of the classic building from the N64 game & Zelda franchise . MMU ready.

38mm scale Lizalfos miniature that breathes fire.

Deku Butler from the Legend of Zelda!

Have you ever played it? What if you try it after reading that book?

New Beveled Versions! Zelda Breath of the Wild Rupee. I made this model in Blender. 1in/3in rupee.

I needed a way to display the Collapsing Master Sword (link below) but couldn't find a pedestal. I used the base of…

This is a 3d interpretation of the Zelda:TotK logo, perfect for wall art or jewelry.

38mm scale Skull Kid wearing the Majora's mask.

When your playing a Zelda game and want to protect your soda now you can.

Remixed to make the statue a single piece by aligning and merging the parts in Prusaslicer.

Petite modélisation du bouclier de Link, dans Zelda Twilight Princess Wii. Merci Nintendo ! Personnal design of the L

Blupee from the Legend of Zelda: Tears of a Kingdom

Remix of Hylian Shield - Full Size by @mh_498145. I made the shield flat as is much easier to build.

This a modified version of the "Master Sword" by Garrett Kearney meant to contain a battery, electronics and LED strips

Heights data from: https://github.com/MrCheeze/botw-tools/

This is the Ocarina of Time.

this is a remix it just needed some mounting holes and made smaller to fit this model of the master sword

Basic model of the small dungeon key from Ocarina of Time. Will update once I get a chance to run it through my…

Remixed the minimalistic pro controller stand with added Zelda Totk look

printable with and without mmu you need M4 Threaded inserts to complete this model

It's been a while since I designed something from Zelda so I decided to quickly model this little trinket from Skyward…

15 characters from The Legend of Zelda: Breath of the Wild

3D printable models of Link’s Ultrahand Rings from the new game, Legends of Zelda Tears of the Kingdom in 2 versons.

This model is compatible with the lego system.

No supports needed. Make sure that the bed is clean and the first layer adheres properly.

All four divine beasts from Zelda Breath of the Wild with amiibo style bases.

A light switch cover for a rocker-switch styled like the Master Sword from Legend of Zelda.

Support-less, print-in-place articulated Guardian model. Remixed with stabilising struts so you don't need a brim.

My interpretation of the master sword as illustrated in the Player's Guide for The Legend of Zelda: A Link to the Past

Four color wall art for Zelda, Tears of the Kingdom

Remixed 3DPrintDogs file for use with INDX and already painted!

This is a rupee from the legend of zelda.

A remix of the original base that cuts it into individual parts and gets rid of extra material.

A full Halloween costume/cosplay for Link in the Soldier Armor from Tears of the Kingdom. This is a work in progress!

Divine Beast Vah Rudania from the Legend of Zelda, Breath of the Wild

Base to hold Ocarina

Link's bow inspired from Zelda games by nintendo. The arrow will also be printed and uploaded. I have sliced it in 11 p

Ever wanted to print a boss key from A Link to the Past? Well now you can! This model consists of two pieces.

This is a Zelda controller stand featuring a Master Sword and Hylian shield. It fits all controller types too!

Bokoblin Chest for SD and micro SD cards.

Minimalist design to wall mount the master sword from @Popandsicle

Small dice tower remix. Please scale it up!

Added a cutout to the mask so the master sword (or other item) can be inserted. I tweaked this to function as a hair…

This is the Mask of Truth. It is a mysterious mask passed down by the Skeikah.

Sleek Triforce fidget spinner - You won't notice its fidgety nature until you pick it up!

Legend of Zelda Hylian shield model

Link Model from Ocarina of Time, designed by the Project M team, remixed by myself. Now updated and fully printable.

Link’s Ultra Hand from The Legend of Zelda, Tears of the Kingdom.

Deku Mask from The Legend of Zelda franchise with my own twist. You can print it on its back. You might need to scale it

A simple zelda themed wall art, easy to print. But...It is in a few pieces... Or print the brand new negative version !

Concerned about it breaking while using it in combat. Not anymore!

Garo's mask from Majora's mask 3D obtained from files extracted by https://www.models-…

Zora's Sapphire

A stand for the Game Watch "The legend of Zelda" and his box.

This is a lithophane of a beautiful Legend of Zelda scene.

Multicolored Major's Mask from Legend of Zelda, compatible with the Bambu P1S printer.

Only found in Twilight Princess, this key appears multiple times in each dungeon.

This is my attempt at Majora's mask from The Legend of Zelda: Majora's Mask game. You'll need to mirror all 5 of the…

4-color AMS Majora’s Mask: High-detail, slim walls, easy assembly with notches/pegs and hidden wall mount.

Broken into pieces to print on MK3. Can be used with standard white or multicolor LED strips.

Link fishing scene from Legend of Zelda: Link's Awakening

Hyrule the holiday season

Legend of Zelda Triforce Coaster

A lamp requiring the Bambul Lab Lamp Kit 001

A 3D map of the map from the video game The Legend of Zelda: A Link to the Past.

Additonal parts: Sleeves for Hookshot - Zelda: Ocarina of Time

Eyes that can be glued in place

Simple model of Dead Hand, a childhood-scarring, disturbing miniboss from the Zelda series, no supports.

3D printed 12 hole ocarina with Triforce symbol

Bookmark made from the Master Sword. You can glue the two halfs together for a 3d sword

Zelda treasure chest opening noise EDIT 2/13/19: I finally got my silk gold filament -- and HOT DANG, this looks way…

Master Sword from The Legend of Zelda: Tears of the Kingdom with interchangeable blades for each form in the games.