FAN-MADE · NOT AFFILIATED WITH THE GAME STUDIOS OR RIGHTS-HOLDERS OF THE FRANCHISES SHOWN
BAMBU LAB 3D PRINTERS: WHICH ONE FOR PROPS
Bambu Lab printers, compared for props.
PropBuilds kits are printed on two Bambu Lab P2S printers, each with an AMS. This page lines up the four Bambu Lab printers that Bambu Lab's own store sells on Amazon (the A1 mini, A1, P1S and P2S) by what matters for props: how big a part fits, whether the printer is enclosed, and how multicolor printing works on each. Checked November 8, 2026.
PropBuilds earns a commission if you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
THE SHORT VERSION
The A1 mini prints up to 180 mm in each direction. The A1, P1S and P2S print up to 256 mm, so a helmet comes out in fewer pieces.
The P1S and P2S are enclosed, which helps with ABS and ASA. The A1 and A1 mini are open-frame printers.
Every model prints one color on its own. Multicolor needs the Combo: an AMS lite on the A1 and A1 mini, an AMS on the P1S, and an AMS 2 Pro on the P2S, which also dries filament at up to 65 °C.
Bambu Lab lists the P2S at up to 600 mm/s and the P1S at 500 mm/s.
The Bambu Lab printers on Amazon
The four printers and their Combos as sold by the Bambu Lab Store on Amazon, each checked in stock on November 8, 2026. Amazon prices change often, so none are shown here. Each card opens the live listing.
For whole helmets and long props in fewer pieces, choose a 256 mm printer (A1, P1S or P2S) over the 180 mm A1 mini; splitting a model covers the rest. For ABS or ASA, choose an enclosed P1S or P2S. For PLA and PETG, the open-frame A1 prints the same 256 mm size. For multicolor badges, signs and figures, get a Combo rather than adding the AMS later.
The four, one by one
What PropBuilds runs
Bambu Lab P2S Combo
Enclosed / 256 mm / up to 600 mm/s
Bambu Lab's newest P-series printer and the one PropBuilds prints its kits on. It is enclosed and prints up to 256 mm in each direction. Bambu Lab says the chamber can hold about 50 °C for engineering filaments, with a carbon filter for the air. The Combo adds the AMS 2 Pro, which feeds four spools and dries filament at up to 65 °C. Without the AMS, the P2S prints one color.
Affiliate link. As an Amazon Associate I earn from qualifying purchases.
Bambu Lab P1S Combo
Enclosed / 256 mm / up to 500 mm/s
The enclosed printer before the P2S, with the same 256 mm build size. Bambu Lab rates it ideal for PLA, PETG, TPU, PVA, PET, ABS and ASA, capable of PA and PC, and not recommended for carbon or glass fiber filaments. The Combo includes one AMS for multicolor printing, and Bambu Lab lists up to 16 colors with more AMS units.
Affiliate link. As an Amazon Associate I earn from qualifying purchases.
Bambu Lab A1 Combo + LED Lamp Kit
Open frame / 256 mm / AMS lite
The same 256 mm build size in an open frame, best with PLA and PETG. Bambu Lab lists full automatic calibration, active flow rate compensation and motor noise cancelling. The Combo adds the AMS lite for multicolor, and this bundle also includes an LED kit for printed lamp designs.
Affiliate link. As an Amazon Associate I earn from qualifying purchases.
Bambu Lab A1 mini Combo
Open frame / 180 mm / AMS lite
The small one: 180 mm in each direction, so full-size helmets print in more pieces. It comes pre-assembled, and Bambu Lab says setup to a first print takes about 20 minutes. The Combo adds the AMS lite for multicolor prints such as badges, signs and figures.
Affiliate link. As an Amazon Associate I earn from qualifying purchases.
FAQ
Which Bambu Lab printer is best for cosplay helmets?
One with a 256 mm build volume (the A1, P1S or P2S), so a full-size helmet prints in fewer pieces. For ABS or ASA, choose the enclosed P1S or P2S.
What is the difference between the P1S and the P2S?
Both are enclosed and print up to 256 mm in each direction. Bambu Lab lists the P2S at up to 600 mm/s against 500 mm/s for the P1S. The P2S Combo comes with the AMS 2 Pro, which dries filament at up to 65 °C; the P1S Combo comes with the AMS.
Do I need the Combo?
Only for multicolor or multi-material prints. Every model prints one color without it, and Bambu Lab's listings note that the AMS (or AMS lite) is required for multicolor.
Can the A1 mini print a helmet?
Yes, in more pieces. At 180 mm per side, a wearable helmet usually prints in several parts that are joined afterwards.
Which printer does PropBuilds use?
Two Bambu Lab P2S printers, each with an AMS. Every PropBuilds kit is printed on them.
Why are there no prices on this page?
Amazon prices change often, so they are not copied here. Each card links to the live listing, where the current price is shown.
PropBuilds earns a commission when you buy through the affiliate links on this page, at no extra cost to you. Each one is marked under its button; plain links earn nothing. Prices are set by each seller and can change after the date shown.
As an Amazon Associate I earn from qualifying purchases.
PropBuilds is not affiliated with or endorsed by Bambu Lab. Bambu Lab and its product names belong to Bambu Lab.
NEWSLETTER
Stay in the
know.
New kit launches, promotions, and 5% off your first order.
// WAIT · ONE LAST THING
Get 5% off your first kit.
Drop your email and we'll send back a 5% off code. No spam, easy unsubscribe.
5% off your first order · one-use per customer · code revealed after submit
