// Contents
PropBuilds earns a commission if you buy through links on this page, at no extra cost to you.
The most-liked Studio Ghibli file to 3D print is Patrickart.hk's Totoro, with 1,530 likes and 9,573 downloads on Printables. Desk pieces and planters fill the rest, led by Heidi Makes' Totoro pen holder, and Kodama from Princess Mononoke are everywhere.
How we ranked them. The PropBuilds Studio Ghibli print library lists 192 files, all on Printables. We read every one live on October 1, 2026 and ranked them by likes. Every note comes from the designer's description.
The ten most-liked Studio Ghibli files
| # | File | Likes | Downloads | License | Good to know |
|---|---|---|---|---|---|
| 1 |
Totoro(My Neighbor Totoro) by Patrickart.hk |
1,530 | 9,573 | CC BY-NC-ND | A Totoro figure, the most-liked and most downloaded file in the library |
| 2 |
Totoro Pen Holder by Heidi Makes |
1,383 | 5,798 | CC BY-NC-SA | A big-mouthed Totoro pen holder that doubles as a desk bin |
| 3 |
Totoro Family(My Neighbor Totoro) by Patrickart.hk |
1,348 | 5,349 | CC BY-NC-ND | The Totoro family |
| 4 |
Kodama Collection (incl. Multi-Color) by Schnippi |
821 | 4,504 | CC BY-NC | Kodama from Princess Mononoke, with a multi-color version and a stick for flower pots |
| 5 |
Totoro (Studio Ghibli) - Pot Plant by CalebTimoteo |
791 | 2,167 | CC BY-NC | A Totoro planter or pen holder; no supports |
| 6 |
Kodama by Arthur Gritzky |
668 | 2,339 | CC BY-NC-SA | Schnippi's Kodama remixed with the eyes and mouth built in for multi-color printing, so no glue |
| 7 |
Catbus(My Neighbor Totoro) by Patrickart.hk |
662 | 2,771 | CC BY-NC-ND | The Catbus |
| 8 |
No Face (Kaonashi - Spirited Away) - Pot Plant by CalebTimoteo |
642 | 1,235 | CC BY-NC | A No Face planter or pen holder; no supports |
| 9 |
Kodama (#1), Princess Mononoke, Miyazaki, FanArt by Valeria Momo & Mattia |
618 | 1,648 | Printables standard | A support-free Kodama, the first of a series |
| 10 |
Ghibli Cookie Cutter Set by 3D Trece |
532 | 1,640 | CC BY | Totoro, Calcifer, Kodama and No-Face cookie cutters, about 75 mm |
Likes and downloads are Printables' counts on October 1, 2026. CC BY-NC files are free for personal prints but not for selling prints; ND files can't be remixed and shared, and Printables' standard license doesn't allow reposting.
Totoro and the Catbus
- Patrickart.hk made Totoro, the Totoro family and the Catbus (CC BY-NC-ND).
- Heidi Makes' big-mouthed Totoro pen holder doubles as a desk bin, and the same designer's Totoro family finger toys print without supports in one color or several (CC BY-SA).
- CalebTimoteo's Totoro planter needs no supports, BN3D's coat rack uses less filament than the design it remixes but is just as strong, and ArcadeImpossible's CC0 tray finishes a Totoro dice tower. tecnoculebras' Totoro lightbox is CC0.
Paint the details with the Army Painter Warpaints Fanatic starter set.
Kodama
Schnippi's Kodama collection has a multi-color version and a stick for flower pots, plus a tree trunk with pegs to seat them (CC BY). Arthur Gritzky's remix builds in the eyes and mouth for multi-color printers, Valeria Momo & Mattia's series is support-free, and Rodrigo Benenson's eyes fit without glue. Telles0808's forest spirits are CC BY-SA and rallekralle's sitting Kodama are CC BY (the arms may need support). For plants, kleenecks' Kodama planter has a well for a succulent and theXorios' takes IKEA's Haworthia pot whole. Glue in separate eyes with gel super glue.
No Face, soot sprites, Calcifer and Jiji
- lahn92's No Face mask prints in 4 parts so it can be made larger, a remix of Ferux95's.
- CalebTimoteo's No Face is a planter, InterlinkKnight's is a 1:18 figure (print the mask slowly), and 3DPrintDogs' offers a heart, with each color in its own file.
- Imagine That's double-sided soot sprites link like Barrel of Monkeys, and wafflecart's dust bunny keychain snaps together with no glue.
- FC2M3D's Calcifer keychain needs no multi-material unit, and SHR3D.eu's flexi Jiji looks best in two colors (CC BY).
Cookie cutters
3D Trece's set covers Totoro, Calcifer, Kodama and No-Face at about 75 mm (CC BY). thenickdude fixed a Totoro cutter's stamp so it prints without supports, and TeamOliva has Totoro (CC BY) and Totoro, Chu and Chibi (CC BY-SA). The Studio Ghibli print library lists all 192 files.
More anime rankings: Naruto, One Piece and Dragon Ball.
FAQ
What is the most popular Studio Ghibli 3D print?
Patrickart.hk's Totoro on Printables, with 1,530 likes and 9,573 downloads, the most of all 192 Ghibli files in our index. The same designer's Totoro family and Catbus are in the top ten too.
Can I 3D print a Kodama?
Yes. Schnippi's Kodama collection has a multi-color version and a tree trunk to sit them on (CC BY), Arthur Gritzky's remix builds the eyes in so there's no glue, and kleenecks' and theXorios' Kodama planters hold a succulent (CC BY).
Is there a No Face mask to print?
lahn92's No Face mask prints in 4 parts so it can be made larger. For display, InterlinkKnight's No Face is a 1:18 figure and CalebTimoteo's is a planter.
What Ghibli gifts can I print?
3D Trece's Totoro, Calcifer, Kodama and No-Face cookie cutters (CC BY), Heidi Makes' Totoro pen holder, wafflecart's dust bunny keychain, FC2M3D's Calcifer keychain and SHR3D.eu's flexi Jiji (CC BY).
As an Amazon Associate I earn from qualifying purchases. The Amazon links on this page are affiliate links: check the current price and details on Amazon before you buy.
PropBuilds is a fan-run site, not affiliated with or endorsed by the studios or rights holders of the games mentioned.
Header photo: Totoro Family (finger toys) by Heidi Makes on Printables, licensed CC BY-SA; cropped, with an overlay added. The edited header is shared under the same licence.