// Contents
PropBuilds earns a commission if you buy through links on this page, at no extra cost to you.
The most-liked Cyberpunk 2077 file to 3D print is Grigi's Malorian Arms 3516, Johnny Silverhand's pistol, with 778 likes on Printables. Skippy is next, and for cosplay, starside_armory's wearable Braindance wreath and CD PROJEKT RED's own files for Judy, V and Panam lead the way.
How we ranked them. The PropBuilds Cyberpunk print library lists 173 files, all on Printables. We read every one live on October 1, 2026 and ranked them by likes. Every note comes from the designer's description.
The ten most-liked Cyberpunk 2077 files
| # | File | Likes | Downloads | License | Good to know |
|---|---|---|---|---|---|
| 1 |
Cyberpunk 2077 Johnny Silverhand's Malorian Arms 3516 screw by Grigi |
778 | 2,681 | CC BY-NC-SA | Johnny Silverhand's Malorian Arms 3516, assembled with screws; parts fit even a Prusa Mini |
| 2 |
Cyberpunk 2077 Skippy The Gun / Arasaka HJKE-11 Yukimura by Rozzo |
732 | 2,184 | CC BY-NC | Skippy, the Arasaka HJKE-11 Yukimura, remixed into two parts that fit a 220 x 220 bed |
| 3 |
Cyberpunk 2077 Braindance Wreath by starside_armory |
451 | 1,313 | CC BY | Judy's Braindance wreath, wearable and LED-ready, with parts for different head sizes |
| 4 |
Cyberpunk 2077 Arasaka Thermal Katana by Pyrohmstr |
446 | 1,357 | CC BY | The Arasaka Thermal Katana, 1.3 m long; no room for electronics |
| 5 |
Cyberpunk 2077 - Tsunami Defense Systems Gun by ra100 |
367 | 4,186 | CC BY-SA | A Tsunami Defense Systems pistol with room for red and blue LEDs and a magnetic magazine |
| 6 |
Cyberpunk 2077 - Judy’s MRAM by CD PROJEKT RED |
328 | 671 | CC BY-NC | Judy's MRAM, uploaded by CD PROJEKT RED from the game files |
| 7 |
Johnny Silverhand Figure - Cyberpunk by Fotis Mint Studios |
257 | 1,293 | Printables standard | A Johnny Silverhand figure; needs supports |
| 8 |
Cyberpunk 2077 - The Relic by tomvh |
229 | 767 | CC BY | The Relic in three parts for three colors |
| 9 |
M-10AF Lexington - Cyberpunk 2077 by Iwog |
208 | 874 | CC BY | The M-10AF Lexington with a movable magazine and slide; printed without supports |
| 10 |
Cyberpunk 2077 logo by DiPT |
206 | 1,286 | CC BY-NC | The Cyberpunk 2077 logo, 150 x 37 x 10 mm |
Likes and downloads are Printables' counts on October 1, 2026. CC BY-NC files are free for personal prints but not for selling prints, and Printables' standard license doesn't allow reposting.
Official files from CD PROJEKT RED
CD PROJEKT RED uploaded cosplay pieces to Printables themselves: Judy’s MRAM, V’s crash pads (the shoulder shock absorbers on V's jacket) and Panam’s tri-buckle. The models were extracted from the game files, and the showcase prints were made on a Prusa CORE One and left ready to polish, prime and paint. They're CC BY-NC, so print them for yourself, not to sell.
Cosplay for Halloween
- starside_armory's Braindance wreath for Judy Alvarez is full size and wearable, with alternative parts for different head sizes and detailed instructions. It takes 3 mm LED bulbs, and the designer says the visible wires should go in whether you add LEDs or not.
- ReProps' Sandevistan from Edgerunners follows the anime, is about 20 inches long, and has holes for LEDs and straps; Willie made one for a David Martinez costume that fits an ESP32-S2 mini and an 18650 battery under the top plate.
- Pyrohmstr's Arasaka Thermal Katana is 1.3 m long; parts may need filing to fit.
Prime with filler and sandable primer before paint, and glue parts with gel super glue. The video game Halloween helmets and masks guide has more costume pieces.
Prop guns
Grigi's Malorian Arms 3516 screws together in a set order (there's a video), with supports and seams set up in the 3MF. Rozzo remixed Elpolako's Skippy into two parts that fit a 220 x 220 bed; Elpolako's original has a magnetic detachable magazine. ra100's Tsunami Defense Systems pistol has room for red and blue LEDs and a magazine held by 5 x 5 x 2 mm (or 5 x 2 mm round) magnets, Iwog's Lexington has a movable magazine and slide, and tothelaunchbay made the Arasaka Shingen and the Militech Crusher. Keep realistic replicas at home or in costume-safe spaces.
Figures, signs and gifts
Fotis Mint Studios' Johnny Silverhand needs supports, tomvh's Relic comes in three parts for silver, black and magenta, and DiPT's logo is 150 x 37 x 10 mm. MaxPrintlab made a door sign for the Afterlife, and Serial-Comma turns a dead M.2 SSD into a cyberdeck-style keychain. The Cyberpunk print library lists all 173 files.
FAQ
What is the most popular Cyberpunk 2077 3D print?
Grigi's Malorian Arms 3516, Johnny Silverhand's pistol, on Printables, with 778 likes. It assembles with screws, and its parts fit even a Prusa Mini.
Did CD PROJEKT RED release official 3D print files?
Yes. CD PROJEKT RED's own Printables account has Judy's MRAM, V's crash pads and Panam's tri-buckle, extracted from the game files for cosplay. They're licensed CC BY-NC, so they're for personal prints only.
What Cyberpunk cosplay pieces can I print?
starside_armory's wearable, LED-ready Braindance wreath for Judy Alvarez, CD PROJEKT RED's crash pads for V's jacket, and two Sandevistans from Edgerunners: ReProps' (about 20 inches, with holes for LEDs) and Willie's, which fits an ESP32-S2 mini and an 18650 battery.
Can I print a Cyberpunk gun?
Several prop guns: Grigi's Malorian Arms 3516, Rozzo's and Elpolako's Skippy, ra100's Tsunami Defense Systems pistol, Iwog's Lexington, and tothelaunchbay's Shingen and Militech Crusher.
As an Amazon Associate I earn from qualifying purchases. The Amazon links on this page are affiliate links: check the current price and details on Amazon before you buy.
PropBuilds is a fan-run site, not affiliated with or endorsed by the studios or rights holders of the games mentioned.
Header photo: Cyberpunk 2077 Braindance Wreath by starside_armory on Printables, licensed CC BY; cropped, with an overlay added.