// Contents
PropBuilds earns a commission if you buy through links on this page, at no extra cost to you.
The most-liked Dragon Ball file to 3D print is Peter Farell's Goku, with 2,234 likes and 20,893 downloads on Printables. zuperbuuworks' articulated Shenron is next, and Lele88's keychains with all 7 Dragon Balls are the quick gift.
How we ranked them. The PropBuilds Dragon Ball print library lists 373 files, all on Printables. We read every one live on October 1, 2026 and ranked them by likes. Every note comes from the designer's description.
The ten most-liked Dragon Ball files
| # | File | Likes | Downloads | License | Good to know |
|---|---|---|---|---|---|
| 1 |
Goku by Peter Farell |
2,234 | 20,893 | CC BY-NC-SA | A Goku figure, the most-liked and most downloaded file in the library, with G-code versions that add supports |
| 2 |
Articulated Shenron Dragon Toy by zuperbuuworks |
1,723 | 8,423 | CC BY-NC-SA | An articulated Shenron toy in short and long sizes, full or flat colours; this version no longer gets updates |
| 3 |
Majin Vegeta Bust by JS-studio |
1,018 | 7,669 | CC BY-NC-SA | A Majin Vegeta bust |
| 4 |
Vegeta Bust with Base by Redux |
725 | 5,535 | CC BY-NC-SA | A Vegeta bust on a Dragon Ball Z base; no supports needed |
| 5 |
Geometric Low Poly Goku by PhaseworksCA |
449 | 2,366 | CC BY-NC-ND | Low poly Goku as 2.5D display art, with a stand |
| 6 |
Goku Kid Support Free Remix by robin3dverse |
439 | 2,898 | CC BY-NC-SA | Kid Goku remixed to print with no supports |
| 7 |
Goku Dragon Ball Z #22 Optimized for 3D Printing by 3DPremiun |
438 | 4,171 | CC BY-SA | A Goku figure optimized for 3D printing; CC BY-SA |
| 8 |
Dragon Ball by Mikhail Babarinow |
368 | 1,962 | CC BY-NC | A Dragon Ball model (the listing has no description) |
| 9 |
Goku Support Free Remix by robin3dverse |
355 | 3,449 | CC BY-NC-SA | Goku remixed to print with no supports |
| 10 |
Geometric Low Poly Vegeta by PhaseworksCA |
338 | 1,695 | CC BY-NC-ND | Low poly Vegeta as 2.5D display art, with a stand |
Likes and downloads are Printables' counts on October 1, 2026. CC BY-NC files are free for personal prints but not for selling prints; ND files can't be remixed and shared, and Printables' standard license doesn't allow reposting.
Goku and Vegeta
- Peter Farell's Goku leads the library and adds G-code versions with organic supports. 3DPremiun's Goku #22 is CC BY-SA.
- robin3dverse remixed Kid Goku, Goku and a fight pose Goku to print with no supports anywhere.
- JS-studio's Majin Vegeta bust and Redux's Vegeta bust (no supports, printed at 0.12 mm layers) are the display pieces, and PhaseworksCA has low poly Goku and Vegeta as 2.5D art with stands.
- Entroisdimensionsfigurine's Son Goku angel is a tribute to Akira Toriyama, cut for FDM printers, with a prepainted 3MF for Bambu Lab printers (CC BY-SA). shahgiprints' Super Saiyan skin turns the Lucky 13 jointed figure into Goku with one extra part.
Paint figures with the Army Painter Warpaints Fanatic starter set.
Shenron and the Dragon Balls
zuperbuuworks' articulated Shenron comes in short and long sizes, in full or flat colours (this version no longer gets updates), and there's a little Shenron keyring too. Gavin's Dragon Ball Guardian coils Shenron around the four-star ball, prints with no supports in PLA or resin, and is CC0. Lele88 published eight keychain variations with all 7 balls, painting the stars with acrylics, and MESH 3D's CC0 four-star planter comes with or without a drainage hole.
Props, gifts and dioramas
priZm's scouter is based on the one Vegeta wears in the Saiyan Saga, Ludiks' Hoi-poi capsule opens for small storage (CC BY), and BODY3D's Dragon Radar is 12 cm in one or two parts. Vector Connections' Capsule Corp. keychain is made for glow-in-the-dark filament, 3D Magic's Ultra Instinct Goku headphone stand prints in 2 parts and needs glue, and Retron Print's two-part Goku cookie cutter embosses the face. MiniWorld3D's Hyperbolic Time Chamber is a multipart diorama you can print in full color on a regular setup. Join parts with gel super glue. The Dragon Ball print library lists all 373 files.
More anime rankings: Naruto, One Piece and Demon Slayer.
FAQ
What is the most popular Dragon Ball 3D print?
Peter Farell's Goku on Printables, with 2,234 likes and 20,893 downloads, the most of all 373 Dragon Ball files in our index. It's CC BY-NC-SA, so prints are for personal use.
Can I 3D print the Dragon Balls?
Yes. Lele88's keychain set has all 7 balls in eight variations, Gavin's Dragon Ball Guardian wraps Shenron around the four-star ball (CC0, no supports), and MESH 3D's four-star planter is CC0.
Is there a Shenron to print?
zuperbuuworks' articulated Shenron comes in short and long sizes, with a little keyring version, and Gavin's Dragon Ball Guardian is a Shenron bust that prints without supports.
Are there Dragon Ball props to print?
priZm's scouter is based on the one Vegeta wears in the Saiyan Saga, Ludiks' Hoi-poi capsule opens for small storage, and BODY3D's Dragon Radar is 12 cm in one or two parts.
As an Amazon Associate I earn from qualifying purchases. The Amazon links on this page are affiliate links: check the current price and details on Amazon before you buy.
PropBuilds is a fan-run site, not affiliated with or endorsed by the studios or rights holders of the games mentioned.
Header photo: Goku DBZ Cosplay at MCM Comic Con 2016 by Altan Dilan on Wikimedia Commons, licensed CC BY 2.0; cropped, with an overlay added.