// Contents
PropBuilds earns a commission if you buy through links on this page, at no extra cost to you.
The most-liked Naruto file to 3D print is BrazdaPrints' Pikachu Kakashi, a Pokemon crossover with 1,032 likes on Printables. Moder's collapsing katana is the most downloaded, and the kunai, shuriken and headbands are the cosplay pieces.
How we ranked them. The PropBuilds Naruto print library lists 389 files, all on Printables. We read every one live on October 1, 2026 and ranked them by likes. Every note comes from the designer's description.
The ten most-liked Naruto files
| # | File | Likes | Downloads | License | Good to know |
|---|---|---|---|---|---|
| 1 |
Pikachu Kakashi by BrazdaPrints |
1,032 | 4,159 | CC BY-NC-SA | Pikachu dressed as Kakashi, a Pokemon crossover |
| 2 |
Collapsing Katana, Naruto,sword,katana by Moder |
472 | 12,119 | CC BY-NC-SA | A collapsing katana with a Naruto design, the most downloaded file in the library |
| 3 |
Pikachu Kakashi 2 by BrazdaPrints |
348 | 2,093 | CC BY-NC-SA | A second Pikachu Kakashi |
| 4 |
Naruto akatsuki multicolor keychain by Lukáš Purnoch |
302 | 1,421 | CC0 (public domain) | A multicolor Akatsuki cloud keychain; CC0 |
| 5 |
Kunai Naruto by Referentiel |
293 | 3,973 | CC BY-NC | Naruto's kunai in two parts |
| 6 |
Shuriken Naruto by Referentiel |
282 | 3,343 | CC BY-NC | Naruto's shuriken |
| 7 |
Shuriken Naruto - Slim Version by Triple G Workshop |
261 | 1,997 | CC0 (public domain) | A slimmed-down shuriken that prints more easily; CC0 |
| 8 |
Bust naruto by Gdprint73 |
260 | 3,308 | CC0 (public domain) | A Naruto bust; CC0 |
| 9 |
itachi moon scene wall decoration by thom |
236 | 754 | CC BY-NC | Itachi's moon scene as wall decor |
| 10 |
Itachi Uchiha by Minus One |
230 | 291 | CC BY-NC | An Itachi Uchiha figure |
Likes and downloads are Printables' counts on October 1, 2026. CC BY-NC files are free for personal prints but not for selling prints; ND files can't be remixed and shared, and Printables' standard license doesn't allow reposting.
Cosplay: headbands, kunai and shuriken
- Rayko's Leaf Village headband is bent to fit after printing: heat it carefully with a hair dryer. Xavier Marquet's Konoha plate is about 10 x 4.5 cm and 3 mm thick.
- Referentiel's kunai is a two-part assembly, with Minato’s kunai and a shuriken too; Triple G Workshop slimmed the shuriken down to print more easily (CC0).
- TheSwedish's full size kunai is 320 mm, joined with 3 mm pins, with a display shelf; they printed it in ABS to glue and smooth with acetone.
- Jace1969 shared an Itachi mask.
Glue multi-part props with gel super glue and prime with filler and sandable primer before paint. The Halloween costume props guide has more.
Figures
BrazdaPrints made two Pikachu Kakashis, Gdprint73's Naruto bust is CC0, Minus One has Itachi, Lagan Designs' Kurama figurine prints in place (with supports) and was painted with acrylics, and PixelChroniclesMiniatures' Gamabunta is a tabletop miniature with an optional 25 mm base. Paint figures with the Army Painter Warpaints Fanatic starter set.
Decor and gifts
thom's wall piece shows Itachi's moon scene, Kurt Richter's coasters cover the dojutsu eyes with a holder (swap filament mid-print for the colors), Goyetus' Sharingan visualizers take an 8 x 3 mm magnet, ar3Dprints' logo prints orange then black, korniton's chibi cookie cutters come in two pieces, and Lukáš Purnoch's Akatsuki keychain is CC0. The Naruto print library lists all 389 files.
More anime rankings: Demon Slayer.
FAQ
What is the most popular Naruto 3D print?
BrazdaPrints' Pikachu Kakashi on Printables, a Pokemon crossover with 1,032 likes. Moder's collapsing katana with a Naruto design is the most downloaded (12,119).
Can I 3D print a Naruto headband?
Yes. Rayko's Leaf Village headband is bent to fit after printing: heat it carefully with a hair dryer. Xavier Marquet's Konoha headband plate is about 10 x 4.5 cm and 3 mm thick.
Are there Naruto kunai and shuriken to print?
Referentiel's kunai (two parts) and shuriken, Triple G Workshop's CC0 slim shuriken, Referentiel's Minato kunai, and TheSwedish's full size 320 mm kunai with a display shelf.
What Naruto prints work for a costume?
The headband and plate, kunai and shuriken, and Jace1969's Itachi mask. Lukáš Purnoch's Akatsuki keychain is CC0.
As an Amazon Associate I earn from qualifying purchases. The Amazon links on this page are affiliate links: check the current price and details on Amazon before you buy.
PropBuilds is a fan-run site, not affiliated with or endorsed by the studios or rights holders of the games mentioned.
Header photo: Shuriken Naruto - Slim Version by Triple G Workshop on Printables, licensed CC0; cropped, with an overlay added.