// Contents
PropBuilds earns a commission if you buy through links on this page, at no extra cost to you.
The most-liked Star Wars file to 3D print is Willi's B1 battle droid kit card, with 14,905 likes on Printables, just ahead of Eastman's Darth Vader bust, the most downloaded file in the library. Kit cards, planters and Mandalorian gear fill the rest. Lightsabers and Grogu have their own rankings (linked at the end).
How we ranked them. The PropBuilds Star Wars print library lists 727 files, all on Printables. We read every one live on October 1, 2026 and ranked them by likes. Every note comes from the designer's description.
The ten most-liked Star Wars files
| # | File | Likes | Downloads | License | Good to know |
|---|---|---|---|---|---|
| 1 |
Star Wars B1 Battle Droid 2.0 Kit Card by Willi |
14,905 | 49,958 | CC BY-NC-SA | A B1 battle droid action figure as a kit card, the most-liked file in the library |
| 2 |
Darth Vader Bust (STL) by Eastman |
14,602 | 66,758 | CC BY-NC-SA | Eastman's Darth Vader bust, the most downloaded file in the library |
| 3 |
Star Wars BD-1 Droid Kit Card 1.0 by fixumdude |
12,698 | 49,949 | Printables standard | BD-1 from Jedi: Fallen Order as a kit card (a version 2 with better clips is linked) |
| 4 |
Collapsing Lightsaber (Print in Place) by 3D Printing World |
10,603 | 56,275 | Printables standard | A print-in-place collapsing lightsaber, 205 mm printed and over 950 mm extended |
| 5 |
AT-AT - Star Wars Pot Plant by CalebTimoteo |
8,077 | 16,016 | CC BY-NC | An AT-AT planter or pen holder |
| 6 |
Millennium Falcon Kit Card by Fixumdude by fixumdude |
7,321 | 20,255 | CC BY-NC | The Millennium Falcon as a kit card |
| 7 |
The Mandalorian - Star Wars Fanart - 30cm by Printed Obsession |
5,767 | 19,492 | CC BY | A 30 cm Mandalorian figure |
| 8 |
Build Your Own Lightsaber, Parts Collection 1 by 3D E |
5,638 | 6,007 | CC BY-NC-SA | Modular build-your-own lightsaber parts from five sabers |
| 9 |
X-Wing Kit Card REDUX by Nakozen |
5,401 | 18,092 | CC BY-NC | An X-Wing kit card that hangs on a tree, a light or a mirror |
| 10 |
Death Star - Star Wars Pot Plant by CalebTimoteo |
5,378 | 14,294 | CC BY-NC | A Death Star planter that needs no supports |
Likes and downloads are Printables' counts on October 1, 2026. CC BY-NC files are free for personal prints but not for selling prints; ND files can't be remixed and shared, and Printables' standard license doesn't allow reposting.
Kit cards
Kit cards print flat and snap together like a model kit. Willi's B1 battle droid leads the library, and the same designer has a pit droid. fixumdude's BD-1 and Millennium Falcon are next, Nakozen's X-Wing hangs on a tree or a mirror, basti30's snowflake X-Wing is a Christmas ornament (CC BY), and Aron made a Droideka.
Mandalorian and Halloween
- stevenmarx shows how to print TheBrokenNerd83's Mandalorian helmet in sizes S, M and L, and GamerForge's full costume adds armor, a jetpack and a blaster; scale the parts to your size.
- UnimatrixRed's Darksaber splits Polymath314's design by color, so it needs no paint.
- Printed Obsession's 30 cm Mandalorian figure is CC BY.
Fill helmet seams with filler and sandable primer, pad the helmet with a helmet padding kit, glue armor parts with gel super glue, and paint with the Army Painter Warpaints Fanatic starter set.
Busts, planters and ships
Eastman's Vader bust and Stormtrooper helmet on a pedestal are display pieces (the helmet is not meant to be worn), and Fotis Mint Studios' Yoda bust prints without supports. CalebTimoteo's AT-AT and Death Star planters double as pen holders. DanielAlex's Imperial Star Destroyer is 160 mm long at 1:10,000 scale in four versions (CC BY), Kirby Downey's 1:75 AT-AT has 15 points of articulation and goes together without glue, and TheCraftyMaker's Tatooine shadow box stacks 5 numbered plates. The Star Wars print library lists all 727 files.
Lightsabers have their own ranking: lightsaber 3D print files, led by 3D Printing World's collapsing saber and 3D E's build-your-own parts. So does Grogu.
FAQ
What is the most popular Star Wars 3D print?
Willi's B1 battle droid kit card on Printables, with 14,905 likes, the most of all 727 Star Wars files in our index. Eastman's Darth Vader bust is the most downloaded (66,758).
Can I 3D print a Mandalorian helmet?
Yes. stevenmarx shows how to print TheBrokenNerd83's Mandalorian helmet in sizes S, M and L, and GamerForge's full Mandalorian costume adds armor, a jetpack and a blaster (scale the parts to your size).
What are Star Wars kit cards?
Flat printed sprues you snap apart and assemble, like a model kit. Willi's B1 battle droid and pit droid, fixumdude's BD-1 and Millennium Falcon, Nakozen's X-Wing and Aron's Droideka are the most-liked.
Are there Star Wars ships to print?
DanielAlex's 1:10,000 Imperial Star Destroyer is 160 mm long in four versions (CC BY), Kirby Downey's 1:75 AT-AT has 15 points of articulation and assembles without glue, and the kit cards cover the Falcon and X-Wing.
As an Amazon Associate I earn from qualifying purchases. The Amazon links on this page are affiliate links: check the current price and details on Amazon before you buy.
PropBuilds is a fan-run site, not affiliated with or endorsed by the studios or rights holders of the games mentioned.
Header photo: Star Wars Imperial Star Destroyer by DanielAlex on Printables, licensed CC BY; cropped, with an overlay added.