// Contents
PropBuilds earns a commission if you buy through links on this page, at no extra cost to you.
The most-liked Chainsaw Man file to 3D print is PrintChallenge's Pochita, with 991 likes and 5,752 downloads on Printables. For Halloween there are chainsaw arms, Power horns and a Pochita pumpkin kit.
How we ranked them. The PropBuilds Chainsaw Man print library lists 102 files, all on Printables. We read every one live on October 1, 2026 and ranked them by likes. Every note comes from the designer's description.
The ten most-liked Chainsaw Man files
| # | File | Likes | Downloads | License | Good to know |
|---|---|---|---|---|---|
| 1 |
Pochita (Chainsaw Man) by PrintChallenge |
991 | 5,752 | CC BY-NC | Pochita, the most-liked and most downloaded file in the library |
| 2 |
Pochita (Chainsaw Man) FDM - separated parts by C0PATHUK |
500 | 2,403 | CC BY-NC | Pochita in separate parts for different colors, with a reworked tail and handles; best at 120% or more |
| 3 |
Denji (chainsaw man) by PrintChallenge |
279 | 1,610 | CC BY-NC | A Denji sculpture with an option for LED lights, plus pre-supported files |
| 4 |
Chainsaw Man Head by Triple G Workshop |
198 | 1,065 | CC BY-NC | A Chainsaw Man head built from parts of Nik Potapov's model; needs supports |
| 5 |
HueForge - Power - Chainsaw Man by haunter |
166 | 536 | CC BY-NC | Power as a HueForge print, with color swaps by layer |
| 6 |
Chainsaw Man Accessories for LUCKY 13 by ChadwickTheCrab |
164 | 384 | CC BY | Chainsaw Man head and arm accessories for the Lucky 13 figure, no supports |
| 7 |
Denji from Chainsaw Man anime minifigure by Nik Potapov |
154 | 1,050 | CC BY-NC | A Denji minifigure split into parts, recommended at 11 to 20 cm |
| 8 |
Chainsaw Man Key Cap by Vioppoiv |
126 | 820 | CC0 (public domain) | A Pochita keycap for most mechanical switches |
| 9 |
Chainsaw Man 3D Poster cutout Hueforge by shantanugoel |
122 | 312 | CC BY-SA | A 3D cutout poster made with HueForge |
| 10 |
Chibi Pochita Chainsaw Man - Keychain by Lautrec_996 |
119 | 590 | CC BY-NC-SA | A chibi Pochita keychain with filament changes |
Likes and downloads are Printables' counts on October 1, 2026. CC BY-NC files are free for personal prints but not for selling prints; ND files can't be remixed and shared, and Printables' standard license doesn't allow reposting.
Halloween: cosplay and a Pochita pumpkin
- WolfnPrinting's chainsaw arm props and Airis' Power horns (just two pieces, from a Thingiverse original) are CC0.
- Triple G Workshop's Chainsaw Man head uses parts of Nik Potapov's model and needs supports.
- Engineer4Fun's kit turns any real pumpkin into Pochita: print the parts, glue the spikes in and attach them like a Mr. Potato Head.
Smooth props with filler and sandable primer, glue parts with gel super glue, and paint with the Army Painter Warpaints Fanatic starter set. More costume pieces are in the Halloween costume props guide.
Pochita
PrintChallenge's Pochita leads, C0PATHUK's splits into parts for different colors (print at 120% or more), and CalebTimoteo's remix of 3D-Mon's design changes filament for the eyes and glues together (CC BY). The same designer has a Pochita ornament, Lazlo's Slowchita crosses Pochita with Slowpoke, and the small gifts are Vioppoiv's CC0 keycap, Lautrec_996's chibi keychain and korniton's 60 mm cookie cutter.
Denji, Makima and Power
PrintChallenge's Denji sculpture can take LED lights, Nik Potapov's Denji minifigure is split into parts for 11 to 20 cm, and Cubic's Makima and Denji were printed in resin (CC BY). For jointed figures, ChadwickTheCrab's head and arm fit Lucky 13 with no supports (CC BY) and RexFury's arms fit Dummy 13 (CC BY-SA). On the wall: haunter's Power and shantanugoel's poster are HueForge prints, and Haunter's Makima is CC BY. The Chainsaw Man print library lists all 102 files.
More anime rankings: Jujutsu Kaisen, Demon Slayer and Naruto.
FAQ
What is the most popular Chainsaw Man 3D print?
PrintChallenge's Pochita on Printables, with 991 likes and 5,752 downloads, the most of all 102 Chainsaw Man files in our index.
Can I 3D print Chainsaw Man cosplay?
Yes. WolfnPrinting's chainsaw arm props and Airis' Power horns are both CC0, and Triple G Workshop's Chainsaw Man head is in the top ten (it needs supports).
Is there a Pochita pumpkin?
Engineer4Fun's Pochita pumpkin kit turns any real pumpkin into Pochita: print the parts, glue the spikes in place and attach them like a Mr. Potato Head.
What Chainsaw Man gifts can I print?
Vioppoiv's CC0 Pochita keycap, Lautrec_996's chibi Pochita keychain, korniton's Pochita cookie cutter, CalebTimoteo's Pochita ornament and Haunter's Makima wall art (CC BY).
As an Amazon Associate I earn from qualifying purchases. The Amazon links on this page are affiliate links: check the current price and details on Amazon before you buy.
PropBuilds is a fan-run site, not affiliated with or endorsed by the studios or rights holders of the games mentioned.
Header photo: Pochita by CalebTimoteo on Printables, licensed CC BY; cropped, with an overlay added.