// Contents
PropBuilds earns a commission if you buy through links on this page, at no extra cost to you.
The most-liked Resident Evil file to 3D print is Icarus3D's model of Leon's pistol from Resident Evil 4, with 258 likes and 2,917 downloads on Printables. With Halloween close, the knives are the costume pieces, and kMik's T-virus vial is the shelf piece.
How we ranked them. The PropBuilds Resident Evil print library lists 150 files, all on Printables. We read every one live on October 1, 2026 and ranked them by likes. Every note comes from the designer's description.
The ten most-liked Resident Evil files
| # | File | Likes | Downloads | License | Good to know |
|---|---|---|---|---|---|
| 1 |
Leon S.Kennedy's Original Pistol from Resident Evil 4 by Icarus3D |
258 | 2,917 | CC BY-NC-SA | Leon's pistol from Resident Evil 4, sized from the real HK USP; print the version without the laser parts |
| 2 |
Resident Evil Inspired Phone Holder by Johnnyt8 |
228 | 1,745 | CC BY-NC-ND | A phone holder with the S.T.A.R.S. logo; the supports are painted on in the file |
| 3 |
Krauser Knife from Resident Evil 4 by Icarus3D |
214 | 1,949 | CC BY-NC-SA | Krauser's knife from RE4, almost 31 cm; split the blade if your printer is small |
| 4 |
Resident Evil Vial by kMik |
211 | 723 | CC BY-SA | A T-virus vial: transparent barrel in vase mode around a colored helix |
| 5 |
Simple T-Virus Model by Sandeagle |
206 | 593 | GPL v2.0 | A T-virus helix and base for a 3 cm glass tube |
| 6 |
Resident Evil-2 Keys by TheHunteOfficia1 |
196 | 1,162 | CC BY-SA | The Spade, Diamond and Club keys from the Resident Evil 2 remake |
| 7 |
Leon S. Kennedy (Resident Evil Requiem) by Buřina 3D |
168 | 1,479 | CC BY-NC-SA | Leon from Resident Evil Requiem in tactical gear, on a base with a defeated mutant |
| 8 |
Resident Evil Fan Collectible - Leon S Kennedy RE2 by Ts3D |
164 | 1,239 | CC BY-NC-ND | Leon from RE2 as a 25 mm miniature or a 100 mm collectible |
| 9 |
Umbrella Corp. Logo w/ Slogan (Resident Evil/Biohazard) - Fr by 8-Bit Designs |
160 | 810 | CC BY-NC-SA | An Umbrella Corporation logo fridge magnet for multicolor printing |
| 10 |
Umbrella Corporation Tool Box by Frikarte3D |
130 | 665 | CC BY-NC-SA | An Umbrella Corporation tool box, remixed from Yanev's parametric box |
Likes and downloads are Printables' counts on October 1, 2026. CC BY-NC files are free for personal prints but not for selling prints, ND files can't be remixed and shared, and GPL files can be shared under the same license.
Knives and weapons for cosplay
- Icarus3D's Krauser knife from RE4 is almost 31 cm long: print the blade diagonally across the bed (or split it on a smaller printer), print the alignment pin twice, and glue the two handle halves to the blade.
- ODCA Props made the Chris and Claire Redfield combat knife for their own Chris Redfield cosplay, in 4 parts to make printing, sanding and painting easier, plus Leon's primal knife from the RE4 remake.
- Pepe_NL's hatchet from Resident Evil Requiem is CC0.
- Icarus3D sized Leon's pistol from the real HK USP. Print the version without the wire and laser control, which the designer says are tricky. Carry any realistic replica with care in public.
Glue blades and handles with gel super glue, smooth the seams with filler and sandable primer, and a little Rub n Buff Silver Leaf on the edge gives it a metallic finish. The video game Halloween helmets and masks guide has more costume pieces.
T-virus vials and keys
kMik's vial prints its protective barrel in vase mode in transparent plastic, and the helix looks best in transparent colored plastic. Sandeagle's helix and base fit a real 3 cm glass tube about 12 cm long; they printed the base in silver silk PLA and the helix in PVB, smoothed with IPA. For puzzle fans, TheHunteOfficia1 made the Spade, Diamond and Club keys from the Resident Evil 2 remake, and Marcos Thimmig's Deck Key is CC0.
Figures
Buřina 3D's Leon from Resident Evil Requiem stands in tactical gear on a base with a defeated mutant, Ts3D's RE2 Leon comes as a 25 mm miniature or a 100 mm collectible, and ed Vivar modeled the RE4 merchant. Paint them with the Army Painter Warpaints Fanatic starter set.
Umbrella Corporation gear
Frikarte3D's Umbrella tool box remixes Yanev's parametric box, and their multicolor version flips the logo so it reads right when you carry it. 8-Bit Designs and Marcin Mączewski made logo magnets (the second takes a 10 x 1.5 mm round magnet), florinux's keychain is 35 x 35 x 3 mm, Becker Thorne's license plate frame reads Raccoon City, and Johnnyt8's phone holder carries the S.T.A.R.S. logo. Board gamers get openable doors for the Resident Evil 2 board game. The Resident Evil print library lists all 150 files.
More horror rankings: horror movie props.
FAQ
What is the most popular Resident Evil 3D print?
Icarus3D's model of Leon's pistol from Resident Evil 4 on Printables, with 258 likes and 2,917 downloads, the most of all 150 Resident Evil files in our index. It's a display prop sized from the real HK USP; the designer suggests the version without the laser parts, which are tricky to print.
Can I 3D print the T-virus?
Yes. kMik's vial prints its barrel in vase mode in transparent plastic around a colored helix, and Sandeagle's helix and base fit a real 3 cm glass tube about 12 cm long.
What Resident Evil props work for a Halloween costume?
Krauser's knife (almost 31 cm), ODCA Props' Chris and Claire Redfield combat knife, made for their own Chris Redfield cosplay, Leon's primal knife from the RE4 remake, and Pepe_NL's CC0 hatchet from Resident Evil Requiem.
Are there Resident Evil keys to print?
TheHunteOfficia1's set has the Spade, Diamond and Club keys from the Resident Evil 2 remake, and Marcos Thimmig's Deck Key is CC0.
As an Amazon Associate I earn from qualifying purchases. The Amazon links on this page are affiliate links: check the current price and details on Amazon before you buy.
PropBuilds is a fan-run site, not affiliated with or endorsed by the studios or rights holders of the games mentioned.
Header photo: Resident Evil Vial by kMik on Printables, licensed CC BY-SA; cropped, with an overlay added. The edited header is shared under the same licence.