// Contents
PropBuilds earns a commission if you buy through links on this page, at no extra cost to you.
You can 3D print Ghost's skull mask from Call of Duty for free. The most-liked file is Zdenixis's Modern Warfare 2 mask on Printables (160 likes), which its designer printed in heat-resistant PLA and sewed to a black balaclava for airsoft. Rushy_Rush's newer Ghost mask is CC BY and made for cosplay or display.
How we picked them. PropBuilds indexes 19 Call of Duty Ghost and operator mask files, all on Printables. We re-read them live on October 1, 2026; the masks you can wear are below, then the figures and display pieces. Notes come from each designer's description.
Ghost masks you can wear
| File | Likes | License | Good to know |
|---|---|---|---|
|
GHOST- Modern Warfare 2 Mask by Zdenixis |
160 | CC BY-NC | The MW2 Ghost mask. The designer printed it in heat-resistant PLA with supports, drilled the holes, and sewed it to a black balaclava for airsoft |
|
Call of Duty Ghost Masks by Rushy_Rush |
144 | CC BY | For cosplay or display; stitch the edges with black yarn or string. Faces differ, so expect small fit tweaks |
|
Nikto/Никто Operator Mask (Call of Duty) by FaboElChapo |
20 | CC BY-SA | Nikto's mask from MW2 with a working helmet mount; uses a 20 mm elastic band |
Likes are Printables' counts on October 1, 2026. CC BY-NC files are free for personal prints but not for selling prints.
Building a wearable Ghost mask
The printed mask is only the face; the hood around it is fabric. Zdenixis's route is the simplest: drill small holes around the edge and sew the mask onto a black balaclava. Rushy_Rush stitched the edges with black yarn for a sewn-on look, and notes that one mask can't fit every face perfectly, so plan on small tweaks. For FaboElChapo's Nikto mask you'll need a 20 mm elastic band; glue the NVG mount down, since the bolts are only decorative. A gel super glue handles small parts, and the Army Painter Warpaints Fanatic starter set (11 paints, 18 ml each) is enough to paint it.
Ghost figures and display pieces
- A Ghost figure by Peter Farell, with a posed version linked from the same page.
- An anime-style Ghost statue and an 11 cm Ghost statuette by Domenico Miranda, both CC0.
- Ghost O Pus by BadCompany, a stylized Ghost figure. The designer warns the mic is very thin and supported all around the head and mic.
- A layered Ghost art piece by Drift Displays: no multi-material unit needed, just a filament change at a pause.
- A Ghost mask clock face that houses a clock mechanism, designed for a multi-color printer.
The Call of Duty print library links every Call of Duty file we track, and the video game Halloween helmets and masks guide covers costume pieces from other games. Modern Warfare 4's launch date is on the game countdowns page.
FAQ
Can you 3D print Ghost's mask from Call of Duty?
Yes. The most-liked file on Printables is Zdenixis's Modern Warfare 2 Ghost mask (160 likes), and Rushy_Rush posted a newer Ghost mask in 2026 under a CC BY license (144 likes).
How do you wear a 3D printed Ghost mask?
Zdenixis drilled small holes in the printed mask and sewed it to a black balaclava, which is how they wore it for airsoft. Rushy_Rush stitched around the edges with black yarn. Either way, expect to make small adjustments for your face.
What filament should I use for a Ghost mask?
Zdenixis printed it in heat-resistant PLA with supports and 20% infill, and thinks normal PLA or ABS would work too.
Are there other Call of Duty operator masks to print?
Yes. FaboElChapo's Nikto mask from MW2 has a working helmet mount and uses a 20 mm elastic band, the same width as that designer's other masks.
As an Amazon Associate I earn from qualifying purchases. The Amazon links on this page are affiliate links: check the current price and details on Amazon before you buy.
PropBuilds is a fan-run site, not affiliated with or endorsed by the studios or rights holders of the games mentioned.
Header photo: Call of Duty Ghost Masks by Rushy_Rush on Printables, licensed CC BY; cropped, with an overlay added.