// Contents
PropBuilds earns a commission if you buy through links on this page, at no extra cost to you.
The most-liked Squid Game file to 3D print is r1nce's Front Man mask, with 1,451 likes and 12,989 downloads on Printables, and the Goon mask from the same uploader is third. In between sits theXorios' gonggi, the Korean jacks game from season 2.
How we ranked them. The PropBuilds Squid Game print library lists 233 files, all on Printables. We read every one live on October 1, 2026 and ranked them by likes. Every note comes from the designer's description.
The ten most-liked Squid Game files
| # | File | Likes | Downloads | License | Good to know |
|---|---|---|---|---|---|
| 1 |
Squid Game - Front Man mask by r1nce |
1,451 | 12,989 | CC BY | The Front Man mask from kimgooni's model, set up to print on a Prusa Mini+ |
| 2 |
GONG-GI from Squid game by theXorios |
807 | 11,368 | CC BY-SA | Gonggi, the Korean jacks game from season 2 |
| 3 |
Squid Game - Goon mask by r1nce |
488 | 3,955 | CC BY | A collapsible Goon mask, scaled to 95% to fit a Prusa Mini+; the designer says it still fits |
| 4 |
Squid Game Gonggi by PanLukas |
469 | 6,422 | Printables standard | A gonggi set with no supports |
| 5 |
Gonggi Squid Game by VDS3D |
324 | 6,156 | CC BY-NC | Gonggi stones with the white symbols printed separately, so no AMS is needed |
| 6 |
Squid Game Soldier Bust by Fotis Mint Studios |
301 | 1,904 | Printables standard | A soldier bust, a collaboration with Wekster |
| 7 |
Squid game cookie cutters by Bobino |
300 | 1,548 | CC BY | Squid Game cookie cutters; no supports, 3 perimeters |
| 8 |
Squid Game Front Man mask by 3db.creation |
265 | 1,910 | CC BY-NC-ND | A wearable Front Man mask, studied from every on-screen shot |
| 9 |
SQUID GAME - Gonggi game *weighted* (nuts) by Jannik |
223 | 2,017 | CC BY-NC-ND | Gonggi stones weighted with M6 nuts to 6.5 g each |
| 10 |
Squid Game Gonggi Catching Toy, Clicker Keychain by Valeria Momo & Mattia |
216 | 1,635 | Printables standard | A gonggi clicker keychain with a tactile button |
Likes and downloads are Printables' counts on October 1, 2026. CC BY-NC files are free for personal prints but not for selling prints; ND files can't be remixed and shared, and Printables' standard license doesn't allow reposting.
Masks for Halloween
- Front Man: r1nce shares kimgooni's model with a 3MF set up for a good print and g-code tested on a Prusa Mini+. 3db.creation's wearable version was studied from every on-screen shot; the extras (a 3-point buckle, eye mesh and display stand) are separate. Joseph simplified it for a Prusa MINI with as few supports as possible: about 16 hours with the chin flat on the bed.
- Guards: r1nce's Goon mask is collapsible and scaled to 95% to fit the Mini+, and the designer says it still fits their face and head. Wekster has a soldier mask, and StagZer0's waiter mask remix adds slits for an elastic band.
Smooth a mask with filler and sandable primer before painting, and a helmet padding kit keeps it comfortable through a party. The Halloween costume props guide has more.
Gonggi and the games
theXorios' gonggi is CC BY-SA, PanLukas's needs no supports, and VDS3D's prints the white symbols separately so you don't need an AMS (calibrate first; the tolerances are tight). Jannik's stones take M6 nuts for 6.5 g each, with a storage case, and Valeria Momo & Mattia's clicker keychain has a tactile button. For the cookie challenge, Bobino's cookie cutters need no supports, and TeamOliva's are full size, 100 x 100 mm. There's also Referentiel's Squid Game card at credit card size and the keys and knives from season 3.
Figures
Fotis Mint Studios' soldier bust is a collaboration with Wekster. Paint them with the Army Painter Warpaints Fanatic starter set. The Squid Game print library lists all 233 files.
More Halloween rankings: horror movie props.
FAQ
What is the best Squid Game mask to 3D print?
By likes, r1nce's Front Man mask on Printables (1,451 likes, 12,989 downloads), from kimgooni's model and set up for a Prusa Mini+. 3db.creation's wearable Front Man was studied from every on-screen shot, and Joseph's is simplified to print on a Prusa MINI with as few supports as possible (about 16 hours).
Is there a Squid Game guard mask to print?
Yes. r1nce's Goon mask is collapsible and scaled to 95% to fit a Prusa Mini+, and the designer says it still fits their face and head. Wekster has a soldier mask, and StagZer0's waiter mask remix adds slits for an elastic band.
Can I 3D print a gonggi set?
Several: theXorios' gonggi is CC BY-SA, VDS3D's prints the white symbols separately so you don't need an AMS, and Jannik's stones take M6 nuts for 6.5 g each, with a matching storage case.
As an Amazon Associate I earn from qualifying purchases. The Amazon links on this page are affiliate links: check the current price and details on Amazon before you buy.
PropBuilds is a fan-run site, not affiliated with or endorsed by the studios or rights holders of the games mentioned.
Header photo: Squid Game - Front Man mask by r1nce on Printables, licensed CC BY; cropped, with an overlay added.