// Contents
PropBuilds earns a commission if you buy through links on this page, at no extra cost to you.
The most-liked Five Nights at Freddy's file to 3D print is Gabgra11's wearable Glamrock Freddy head, with 1,109 likes on Printables: its jaw is hinged so it opens as you talk. With Halloween coming, the masks are the stars, and ninjakitty7's Marionette mask is the one that fits small printers. For the shelf, bcool1313's articulated Springtrap leads the figures.
How we ranked them. The PropBuilds FNAF print library lists 232 files, all on Printables. We read every one live on October 1, 2026 and ranked them by likes. Every note comes from the designer's description.
The ten most-liked FNAF files
| # | File | Likes | Downloads | License | Good to know |
|---|---|---|---|---|---|
| 1 |
Glamrock Freddy Wearable Mask with Hinged Jaw by Gabgra11 |
1,109 | 7,289 | CC BY-SA | Wearable Glamrock Freddy head whose jaw opens as you talk; hinges on two skateboard bearings |
| 2 |
FNAF Marionette Mask by ninjakitty7 |
832 | 8,486 | CC BY | Marionette mask in four quadrants joined with filament pegs, so it fits small printers; strap points on the back |
| 3 |
Springtrap 13 (UPDATE) by bcool1313 |
632 | 3,800 | CC BY-SA | Articulated Springtrap figure with four swap heads, a knife and an axe |
| 4 |
Plushtrap by Jayden Lowry |
488 | 1,793 | CC BY-NC-ND | Plushtrap figure (the uploader credits another modeller) |
| 5 |
Freddy Fazbear by Peter Farell |
385 | 3,200 | CC BY-NC | Freddy Fazbear with an integrated endoskeleton |
| 6 |
Fnaf Plushies by MystChic Art |
330 | 5,084 | CC0 (public domain) | FNAF plushie figures that need no supports; CC0 |
| 7 |
Animatronic FNAF Bonnie by HendrikxWorkshop |
296 | 1,979 | CC BY-NC-SA | An animatronic Bonnie, with build videos and a parts list |
| 8 |
Fnaf Glamrock Freddy by Codi |
280 | 4,559 | CC BY-NC-SA | Glamrock Freddy figure with movable joints |
| 9 |
2.0 Springtrap 13 by bcool1313 |
280 | 1,514 | CC BY-SA | A second Springtrap, styled after his Dead by Daylight look; needs supports |
| 10 |
Springtrap - Carbon 13 by MysticCreativity |
253 | 976 | CC BY-NC-SA | Springtrap remixed for the Carbon 13 figure |
Likes and downloads are Printables' counts on October 1, 2026. CC BY-NC files are free for personal prints but not for selling prints, and ND files can't be remixed and shared.
FNAF masks for Halloween
- Glamrock Freddy: Gabgra11 added a hinged jaw and widened the neck hole of Official_Dino55's head. The hinges need two skateboard bearings, and rubber bands spring the jaw shut. The eyes in the designer's build use 16-LED WS2812 rings, and the finish came from Bondo spot putty, primer-filler and gloss spray paint.
- Marionette: ninjakitty7's mask is thin to save weight, prints in four quadrants joined with pegs cut from 1.75 mm filament, and has strap points on the back. Plan on just over 48 hours of printing.
- Springtrap: there's a Springtrap mask too.
For any of them, filler and sandable primer smooths the layers before paint and a helmet padding kit makes a full head comfortable for a night of trick-or-treating.
Figures
bcool1313's articulated Springtrap comes with four swap heads (closed, open, laughing, and one with an axe in it), plus a knife and an axe; a second version follows his Dead by Daylight look, and MysticCreativity remixed it for Carbon 13. Codi has Glamrock Freddy, Foxy and Montgomery Gator with movable joints, Peter Farell's Freddy Fazbear has an integrated endoskeleton, and MystChic Art's plushie figures need no supports and are CC0.
Working props
HendrikxWorkshop built an animatronic Bonnie (three build videos, with the parts list in their descriptions) and an animatronic Nightmare Cupcake their daughter chose. Liam L.'s FNAF 1 door and light button works with a single rocker light switch, and Foobar54 made a Freddy's arcade token for the movie release. A gel super glue handles the small parts. The FNAF print library lists all 232 files, and the video game Halloween helmets and masks guide covers costume pieces from other games.
FAQ
What is the best FNAF mask to 3D print?
The most-liked FNAF file of all is Gabgra11's wearable Glamrock Freddy head (1,109 likes), with a jaw that opens as you talk. For a lighter mask, ninjakitty7's Marionette mask prints in four parts on small printers and has strap points on the back.
How long does a FNAF mask take to print?
ninjakitty7 says the Marionette mask took just over 48 hours of printing in total, in four chunks.
Are there FNAF figures to 3D print?
Yes: bcool1313's articulated Springtrap with four swap heads, Codi's Glamrock Freddy with movable joints, Peter Farell's Freddy with an integrated endoskeleton, and MystChic Art's CC0 plushie figures, which need no supports.
Can I make a working FNAF prop?
HendrikxWorkshop built an animatronic Bonnie and a Nightmare Cupcake, with videos, and Liam L.'s FNAF 1 door and light button works with a single rocker light switch.
As an Amazon Associate I earn from qualifying purchases. The Amazon links on this page are affiliate links: check the current price and details on Amazon before you buy.
PropBuilds is a fan-run site, not affiliated with or endorsed by the studios or rights holders of the games mentioned.
Header photo: Glamrock Freddy Wearable Mask with Hinged Jaw by Gabgra11 on Printables, licensed CC BY-SA; cropped, with an overlay added. The edited header is shared under the same licence.