// Contents
PropBuilds earns a commission if you buy through links on this page, at no extra cost to you.
The most-liked Witcher file to 3D print is Fotis Mint Studios' bust of Geralt, with 3,868 likes and 14,915 downloads on Printables, and it includes the wolf medallion. For a prop, JS-studio's life size sword from the Netflix series is next, and medallions for the Witcher schools fill the rest.
How we ranked them. The PropBuilds Witcher print library lists 292 files, all on Printables. We read every one live on October 1, 2026 and ranked them by likes. Every note comes from the designer's description.
The ten most-liked Witcher files
| # | File | Likes | Downloads | License | Good to know |
|---|---|---|---|---|---|
| 1 |
Geralt Of Rivia - The Witcher by Fotis Mint Studios |
3,868 | 14,915 | Printables standard | A bust of Geralt from the games, with the wolf medallion included; resin files come pre-supported |
| 2 |
The Witcher life size Sword by JS-studio |
1,197 | 4,046 | CC BY-NC-SA | Geralt's sword from the first Netflix episode, life size, in nine parts |
| 3 |
Ciri - Alternate Look - The Witcher 3 by Magnavis |
870 | 2,329 | CC BY-NC-ND | Ciri in her alternate look; free for non-commercial use only |
| 4 |
Collapsing sword, sword, the witcher, sword, meč, zaklínač, by Moder |
745 | 8,249 | CC BY-NC-SA | A collapsing sword; break through the first layer at the blade after printing |
| 5 |
Triss Merigold Fox Mask - The Witcher 3 by Quint |
631 | 2,117 | CC BY-NC-SA | Triss Merigold's fox mask from The Witcher 3; close to the game, the designer says |
| 6 |
Witcher wolf controller holder by W1nter |
625 | 3,025 | CC BY-NC-ND | A wolf head that holds an Xbox or PlayStation controller; organic supports, especially for the teeth |
| 7 |
The Witcher Bookend by Preischl 3D |
595 | 1,775 | CC BY-NC | A wolf head bookend; needs supports, PLA or PETG |
| 8 |
The Witcher Dice Tower by Cypel |
508 | 1,702 | CC BY-NC | A wolf medallion dice tower for dice poker fans |
| 9 |
The Witcher 3: Ciri, Yennefer, and Triss by Hobo4ssassin |
496 | 4,310 | CC BY-NC | Ciri, Yennefer and Triss, sized to each other; 0.2 mm nozzle and 0.1 mm layers |
| 10 |
Witcher Medallion by Peter Farell |
492 | 2,346 | CC BY-NC | The wolf medallion |
Likes and downloads are Printables' counts on October 1, 2026. CC BY-NC files are free for personal prints but not for selling prints; ND files can't be remixed and shared, and Printables' standard license doesn't allow reposting.
Medallions
- Peter Farell's wolf medallion is the most-liked on its own, and HT Hammer's is CC0 and made to wear.
- 3Demon's Cat School pendant is about 70 x 59 x 25 mm at full size; if you scale it down, they recommend a resin printer. Their Netflix amulet shows Geralt's wolf, Yennefer's star and Ciri's swallow, in smooth and sharp versions.
- Sparrow Design gathered the school medallions into one set, and JS-studio's Netflix necklace has a version with an inscription on the back.
- Offbeat Printing's illuminated School of the Wolf plaque gets its color from a filament change, no MMU, and just fits a Prusa Mini.
Gray filament looks flat on a medallion. A fingertip of Rub n Buff Silver Leaf wax rubbed over the raised edges and buffed gives it a metal shine.
Swords
JS-studio's sword copies Geralt's from the first episode of the Netflix series at life size, split into nine parts; print with a brim, and supports on the bed for the top of the handle. Their wall mount is four parts with covered screws. 3Demon's Zireael, Ciri's sword, comes cut for a 200 mm bed plus a full uncut file, and Moder's collapsing sword needs one step after printing: break through the first layer at the blade. Glue the sections with gel super glue, then filler and sandable primer hides the seams before paint.
Figures, masks and desk gear
Fotis Mint Studios' Geralt bust needs supports on an FDM printer; the resin files are pre-supported. Hobo4ssassin's Ciri, Yennefer and Triss are sized to each other and print best with a 0.2 mm nozzle at 0.1 mm layers, and Magnavis' Ciri in her alternate look is free for non-commercial use only. Quint's Triss Merigold fox mask comes close to the game. For the desk, W1nter's wolf head holds an Xbox or PlayStation controller and Yellowtech's stand fits Xbox Series controllers (its upper teeth are fragile), Preischl 3D made a wolf head bookend, Cypel turned the medallion into a dice tower for dice poker, and ORDEEP's bust hangs from a wall bracket or four 15 x 13 x 4 mm magnets. Paint figures with the Army Painter Warpaints Fanatic starter set.
Bookmarks and board games
Druk3D.JS's bookmarks are the steel and silver swords, best at 0.1 mm layers, and Khelian's prints in one piece or in parts glued together, with a filament swap mid-print for color. brian.p7 made draw and discard card holders for The Witcher: Old World board game. The Witcher print library lists all 292 files.
More fantasy game rankings: Skyrim Dragon Priest masks.
FAQ
What is the most popular Witcher 3D print?
Fotis Mint Studios' Geralt of Rivia bust on Printables, with 3,868 likes and 14,915 downloads, the most of all 292 Witcher files in our index. It comes with the wolf medallion, and the resin files are pre-supported.
Is there a Witcher medallion to 3D print?
Many. Peter Farell's wolf medallion is in the top ten, HT Hammer's is CC0 and made to wear, 3Demon has the Cat School pendant and the Netflix amulet (Geralt's wolf, Yennefer's star and Ciri's swallow), and Sparrow Design collected the school medallions in one set.
Can I 3D print Geralt's sword?
JS-studio's life size sword from the first Netflix episode prints in nine parts and has a matching wall mount. 3Demon's Zireael, Ciri's sword, comes cut for a 200 mm bed, and Moder made a collapsing sword.
What Witcher prints are useful?
Wolf head controller holders, Preischl 3D's bookend, Cypel's dice tower for dice poker, sword bookmarks, and brian.p7's card holders for The Witcher: Old World board game.
As an Amazon Associate I earn from qualifying purchases. The Amazon links on this page are affiliate links: check the current price and details on Amazon before you buy.
PropBuilds is a fan-run site, not affiliated with or endorsed by the studios or rights holders of the games mentioned.
Header photo: The Witcher Netflix Series Amulet by 3Demon on Printables, licensed CC BY; cropped, with an overlay added.