// Contents
PropBuilds earns a commission if you buy through links on this page, at no extra cost to you.
The most-liked Lord of the Rings file to 3D print is Fotis Mint Studios' Nazgul figure, with 6,084 likes and 30,447 downloads on Printables, and the same studio's Gandalf and Balrog follow. For props, 3Demon's full-size Narsil and tato_713's One Ring lead.
How we ranked them. The PropBuilds Lord of the Rings print library lists 378 files, all on Printables. We read every one live on October 1, 2026 and ranked them by likes. Every note comes from the designer's description.
The ten most-liked Lord of the Rings files
| # | File | Likes | Downloads | License | Good to know |
|---|---|---|---|---|---|
| 1 |
Nazgul Figure - Lord of the Rings by Fotis Mint Studios |
6,084 | 30,447 | Printables standard | A Nazgul figure, pre-supported for resin; the most-liked and most downloaded file in the library |
| 2 |
Gandalf Figure - Lord of the Rings by Fotis Mint Studios |
3,643 | 18,235 | Printables standard | Gandalf the Grey |
| 3 |
Balrog Figure - Lord of the Rings by Fotis Mint Studios |
3,015 | 12,117 | Printables standard | The Balrog, flame of Udun |
| 4 |
Gandalf Bust - Lord of the Rings by Fotis Mint Studios |
2,262 | 10,555 | Printables standard | A Gandalf bust |
| 5 |
THE LORD OF THE RINGS by Paradox1312 |
2,015 | 4,124 | CC0 (public domain) | A Lord of the Rings book stand; CC0 |
| 6 |
Lord of the Rings Bookmarks by AlexT |
1,993 | 6,507 | Printables standard | Bookmarks of Sauron, the Witch-king and a Gondor soldier |
| 7 |
One Ring by tato_713 |
1,579 | 15,531 | CC BY-SA | The One Ring with the inscription, in several inner diameters |
| 8 |
Narsil Sword - The Lord of the Rings by 3Demon |
1,557 | 7,667 | CC BY-SA | A full-size Narsil, whole or broken, cut for a 200 mm bed |
| 9 |
Balrog Bust - Lord of the Rings by Fotis Mint Studios |
1,532 | 6,003 | Printables standard | A Balrog bust |
| 10 |
Narsil/Andúril Sword by Sam |
1,048 | 3,109 | CC BY-SA | Narsil and Andúril re-cut with dovetail joints for easier assembly |
Likes and downloads are Printables' counts on October 1, 2026. CC BY-NC files are free for personal prints but not for selling prints; ND files can't be remixed and shared, and Printables' standard license doesn't allow reposting.
Swords, the staff and the Ring
- 3Demon's Narsil is a full-size replica, whole or broken, with pieces cut for a 200 mm bed.
- Sam re-cut it as Narsil and Andúril with tight dovetail joints, printed in silver silk PLA with organic supports and a 10 mm brim, and added sections for a shorter broken blade.
- Oddworks' Gandalf the White staff is 1:1 and stands over 1.5 m tall.
- tato_713's One Ring carries the inscription and comes in different inner diameters.
Glue sword sections with gel super glue, smooth them with filler and sandable primer, and rub Rub n Buff Silver Leaf on the blade for a metal finish.
Figures and dioramas
Fotis Mint Studios' Nazgul, Gandalf, Balrog and busts of Gandalf and the Balrog come pre-supported for resin, and their Balrog vs Gandalf diorama puts both on the bridge. Kijai's Barad-dûr is inspired by the Weta model, and their Rivendell follows the movie concept art (the FDM print took 30 hours). Paint them with the Army Painter Warpaints Fanatic starter set.
Books, desks and gifts
Doug Joseph's bookends print in two colors without an MMU, Paradox1312's book stand and Blueberry Thor's Doors of Durin wall art are CC0, AlexT's bookmarks feature Sauron, the Witch-king and a Gondor soldier, and MeasureOnce made lithophane books. On the desk: abluske's Gollum pen holder and Pomeranč's Gandalf pen holder. For tabletop players, Foreverer's Mount Doom dice tower is CC0. The Lord of the Rings print library lists all 378 files.
More fantasy rankings: Harry Potter and The Witcher.
FAQ
What is the most popular Lord of the Rings 3D print?
Fotis Mint Studios' Nazgul figure on Printables, with 6,084 likes and 30,447 downloads, the most of all 378 Lord of the Rings files in our index. Their Gandalf, Balrog and busts fill most of the top ten.
Can I 3D print a full size Lord of the Rings sword?
Yes. 3Demon's Narsil is full size, whole or broken, cut to fit a 200 mm bed, and Sam re-cut it with dovetail joints for easier assembly, printed in silver silk PLA. Oddworks' Gandalf the White staff is 1:1 and stands over 1.5 m.
Is there a One Ring to print?
tato_713's One Ring carries the inscription and comes in different inner diameters to fit a finger.
Are there Lord of the Rings bookends?
Doug Joseph's bookends set prints in two colors without an MMU, Paradox1312's book stand is CC0, and AlexT's bookmarks feature Sauron, the Witch-king and a Gondor soldier.
As an Amazon Associate I earn from qualifying purchases. The Amazon links on this page are affiliate links: check the current price and details on Amazon before you buy.
PropBuilds is a fan-run site, not affiliated with or endorsed by the studios or rights holders of the games mentioned.
Header photo: Narsil/Andúril Sword by Sam on Printables, licensed CC BY-SA; cropped, with an overlay added. The edited header is shared under the same licence.