The Most-Liked Star Trek 3D Print Files: Phasers, Tricorders and More

PropBuilds earns a commission if you buy through links on this page, at no extra cost to you.

The most-liked Star Trek file to 3D print is neil3dprints' Borg Cube mod for the Bambu Lab P1P, with 1,380 likes on Printables. Nakozen's Enterprise kit cards come next, and UnimatrixRed made most of the props: phasers, tricorders, a combadge and a medkit.

The ten most-liked Star Trek files

Likes and downloads are Printables' counts on October 1, 2026. CC BY-NC files are free for personal prints but not for selling prints; ND files can't be remixed and shared, and Printables' standard license doesn't allow reposting.

Phasers

• UnimatrixRed's TNG cobrahead phaser has a solid handle option if you'd rather add rubber grips, and the Type II boomerang phaser from First Contact needs supports only on the body.
• The Strange New Worlds phaser comes static or with a moving trigger, removable power cell magazine and pop-up display, plus a belt holster (CC BY-SA).
• The TOS phaser has a removable P1 hand phaser and a magazine held by 5x5 or 6x2 mm magnets, and there's a phaser from The Motion Picture and The Wrath of Khan.
• The Discovery phaser is UnimatrixRed's remix of ajethridge's design: 22 cm long, with a removable hand phaser and power pack (CC BY-NC).

Prime the layer lines with filler and sandable primer and paint with the Army Painter Warpaints Fanatic starter set.

Tricorders, combadges and away team gear

• Tricorders: the TR-560 from early TNG, the TR-580 from later TNG (science or medical), the TR-590 Mk X from First Contact, and the original series tricorder.
• The TNG combadge prints in separate colors, the rank pips cover cadet to admiral on 6x2 mm magnets, and the TOS communicator has a hollow version for electronics and a holster.
• Geordi's VISOR uses a flexible grill that prints flat, the hypospray has a vial you print in clear filament on 6x2 mm magnets, and the medkit case holds the printed medical props, with versions for 220 x 220 mm beds.
• The Voyager PADD needs no supports, and the Klingon d’k tahg opens its side blades with a slide lever (6x2 mm magnets hold them).

All of these are UnimatrixRed's, and all CC BY.

Ships

Nakozen's kit cards cover the Enterprise-D (with or without a hanging loop), the original Enterprise and Deep Space Nine, made to hang on a Christmas tree. Dsk001's Enterprise NCC-1701 is 14 pieces on a 3-piece base, Bengineer's Enterprise-D is cut to print without supports at 240 mm, joined with filament pins, and CrexisEnnex's magnetic wall display rebuilds the Enterprise-D conference lounge ships on your fridge. robotfriend's Enterprise-F is a print-in-place glider.

The Borg, chess and gifts

neil3dprints' Borg Cube mod turns a Bambu Lab P1P into a cube; Part 1 (CC BY-SA) remixes Bambu Lab's side panels and Part 2 is CC BY-NC-SA. How2Texan's Borg Cube tissue box is assembled with super glue, and greenpizza55's cube is sized at 7 cm to glow over a green LED tea light. mageb's 3D chess set from the original series prints with no supports and no multi-material unit, 31 x 19 x 39 cm. muddymaker's and nerdyviews' coasters and 3DPrintBunny's two-part headphones stand round it out. The Star Trek print library lists all 389 files.

More sci-fi rankings: lightsabers and Grogu.

FAQ

What is the most popular Star Trek 3D print?

neil3dprints' Borg Cube mod for the Bambu Lab P1P, with 1,380 likes on Printables, the most of all 389 Star Trek files in our index. Dsk001's Enterprise NCC-1701 is the most downloaded (6,372).

Can I 3D print a Star Trek phaser?

Yes. UnimatrixRed's TNG cobrahead, First Contact boomerang and TOS phasers are CC BY, and the Strange New Worlds phaser (CC BY-SA) has a moving trigger and a removable magazine. UnimatrixRed's Discovery phaser remix is 22 cm long.

Is there a tricorder to print?

UnimatrixRed has four: the TR-560 from early TNG, the TR-580 from later TNG (science or medical), the TR-590 Mk X from First Contact, and the original series tricorder.

What Star Trek pieces work for cosplay?

UnimatrixRed's TNG combadge prints in separate colors, the rank pips go from cadet to admiral on 6x2 mm magnets, the TOS communicator has a hollow version for electronics, and the medkit case carries the printed medical props.

As an Amazon Associate I earn from qualifying purchases. The Amazon links on this page are affiliate links: check the current price and details on Amazon before you buy.

PropBuilds is a fan-run site, not affiliated with or endorsed by the studios or rights holders of the games mentioned.

Header photo: Star Trek Emergency Medkit by UnimatrixRed on Printables, licensed CC BY; cropped, with an overlay added.