QIDI 3D PRINTERS: WHICH ONE FOR PROPS

Qidi printers, compared for props.

Qidi Tech makes enclosed 3D printers with larger build volumes than most printers at their price. This page lines up the printers Qidi's own store had in stock on November 16, 2026 (the Q2C, Q2, Plus5 and Max4) by what matters for props: how big a part fits, whether the chamber is heated, and how multicolor printing works. PropBuilds prints its kits on Bambu Lab printers and has not tested a Qidi printer, so every figure here is Qidi's own.

PropBuilds earns a commission if you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.

THE SHORT VERSION

  • The Q2C and Q2 print up to 270 x 270 x 256 mm, the Plus5 up to 320 x 320 x 300 mm and the Max4 up to 390 x 390 x 340 mm.
  • All four are enclosed. The Q2, Plus5 and Max4 also heat the chamber, which helps with ABS and ASA. The Q2C does not.
  • Every model prints one color on its own. Multicolor needs the QIDI Box, which is included in the Combo versions.
  • Qidi lists a tool head speed of up to 600 mm/s on the Q2C, Q2 and Plus5, and up to 800 mm/s on the Max4.

The Qidi printers in stock

The printers and add-ons Qidi's own store had in stock on November 16, 2026. Qidi's prices change often, so none are shown here. Each card opens the live product page.

Which one fits what you want

For whole helmets and long props in as few pieces as possible, choose the Max4 or the Plus5. For the rest, splitting a model covers it. For ABS or ASA, choose a model with a heated chamber: the Q2, Plus5 or Max4. For PLA and PETG, the Q2C prints the same size as the Q2. For multicolor badges, signs and figures, get a Combo, which includes the QIDI Box. PropBuilds prints on Bambu Lab printers; the largest of those prints up to 256 mm per side, so the Plus5 and Max4 are the step up in size.

One by one

Most room for the money

QIDI Plus5

Photo: Qidi Tech

QIDI Plus5

Enclosed / 320 x 320 x 300 mm / up to 600 mm/s

The large one that is not the flagship. Qidi lists a 320 x 320 x 300 mm build volume, a 370 °C nozzle, a 120 °C bed and active chamber heating to 65 °C, in an enclosed frame with a three-stage air filter. The extra width over a 256 mm printer means a wearable helmet prints in fewer pieces. The Plus5 Combo adds the QIDI Box for multicolor.

View on Qidi Tech ↗

Affiliate link.

QIDI Max4

Photo: Qidi Tech

QIDI Max4

Enclosed / 390 x 390 x 340 mm / up to 800 mm/s

The biggest printer in Qidi's line-up, with a 390 x 390 x 340 mm build volume. That is large enough to print many full-size helmets, chest pieces and long props in one piece. Qidi lists active chamber heating, an AI camera, and a tool head speed of up to 800 mm/s with 30,000 mm/s² acceleration. The Max4 Combo adds the QIDI Box.

View on Qidi Tech ↗

Affiliate link.

QIDI Q2

Photo: Qidi Tech

QIDI Q2

Enclosed / 270 x 270 x 256 mm / up to 600 mm/s

Qidi's mid-size enclosed printer. It has a 270 x 270 x 256 mm build volume, a nozzle that reaches 370 °C and active chamber heating to 65 °C, which Qidi says improves layer bonding on ABS, PC and glass-filled ABS. It also has a three-part air filter. The Q2 Combo adds the QIDI Box.

View on Qidi Tech ↗

Affiliate link.

QIDI Q2C

Photo: Qidi Tech

QIDI Q2C

Enclosed / 270 x 270 x 256 mm / up to 600 mm/s

The same 270 x 270 x 256 mm build volume as the Q2 at a lower price when checked. Qidi's spec table lists no active chamber heating on the Q2C, and the air filter is optional, so it suits PLA and PETG props more than ABS or ASA. It works with the QIDI Box, and the Q2C Combo includes one.

View on Qidi Tech ↗

Affiliate link.

QIDI Box

Photo: Qidi Tech

QIDI Box

Four spools / dries at up to 65 °C / chain up to four

Qidi's multicolor and multi-material unit. One box feeds four spools, and Qidi says four boxes can be chained for 16. It dries filament at up to 65 °C while printing and switches to a new spool when one runs out. Qidi lists it as compatible with the Plus5, Max4, Q2, Q2C and Plus4. Choose the version that matches your printer.

View on Qidi Tech ↗

Affiliate link.

FAQ

Which Qidi printer is best for cosplay helmets?

The bigger the build volume, the fewer pieces a helmet needs. The Max4 (390 x 390 x 340 mm) fits many full-size helmets in one piece. The Plus5 (320 x 320 x 300 mm) fits some in one piece and most in two. The Q2 and Q2C (270 x 270 x 256 mm) print a full-size helmet in a few parts. Use the helmet size calculator linked below to get the size of your own helmet first.

What is the difference between the Q2 and the Q2C?

Both print up to 270 x 270 x 256 mm at up to 600 mm/s. Qidi lists the Q2 with a 370 °C nozzle, active chamber heating to 65 °C and a three-part air filter. The Q2C spec table lists no chamber heating, and its air filter is optional.

Do I need the Combo?

Only for multicolor or multi-material prints. Every model prints one color without it. The Combo versions include the QIDI Box, and the box is also sold separately.

Why does a heated chamber matter for props?

ABS and ASA warp and split between layers when the air around the print is cool. A heated, enclosed chamber keeps large parts such as helmet shells and armor plates warm while they print. PLA and PETG do not need it.

Where do Qidi printers ship from?

When checked on November 16, 2026, Qidi's store listed the Q2 and Max4 as shipping within 7 days and the Q2C within 15 business days, from its China warehouse. The product page shows the current estimate before you order.

Has PropBuilds tested these printers?

No. PropBuilds kits are printed on two Bambu Lab P2S printers. The figures on this page are the ones Qidi publishes on its own product pages.

Why are there no prices on this page?

Qidi changes its prices and discounts often, so they are not copied here. Each card opens the live product page, where the current price is shown.

Keep looking