// Contents
PropBuilds earns a commission if you buy through links on this page, at no extra cost to you.
The most-liked Splatoon file to 3D print is zapp's ink drop coaster, with 188 likes on Printables. For props, Coleidea's Splatana Stamper comes at full size and even works as a stamp, and Cobaltlfynt's Splat Dualies were made for a cosplay.
How we ranked them. The PropBuilds Splatoon print library lists 72 files, all on Printables. We read every one live on October 1, 2026 and ranked them by likes. Every note comes from the designer's description.
The ten most-liked Splatoon files
| # | File | Likes | Downloads | License | Good to know |
|---|---|---|---|---|---|
| 1 |
Splatoon Coaster - Inkdrop shaped by zapp |
188 | 644 | CC BY | An ink drop coaster sized for big mugs; don't scale the height much |
| 2 |
Splatoon themed keychain / zipper pull by theHeig |
174 | 748 | CC BY-NC-SA | A multicolor squid keychain or zipper pull, from color changes at set layers |
| 3 |
Splatoon Splatana Stamper Replica by Coleidea |
103 | 665 | CC BY | The Splatana Stamper at full size, Figma size and as a working stamp with a TPU belt |
| 4 |
Splatoon Squid Hairclip by monsoonery |
92 | 434 | CC BY-NC | The wearable Squid Hairclip, with filament swaps for green, black and white |
| 5 |
Torpedo (Splatoon 2 & 3) by esoterictriangle |
58 | 272 | CC BY-SA | A moving Torpedo about the size of a marshmallow; keychain or desk piece |
| 6 |
Splat Roller (Splatoon 3) by esoterictriangle |
52 | 185 | CC BY-SA | A Splat Roller that rolls and folds, colored to match the game |
| 7 |
Splatoon Squid Bumper by monsoonery |
50 | 265 | CC0 (public domain) | The Squid Bumper target dummy, about 45 mm; CC0 |
| 8 |
Splatoon 3 Moyai by Kelig |
49 | 313 | CC BY-NC | The Moyai statue from Splatoon 3 |
| 9 |
Splatoon Original Splattershot Multi Print by danik2119 |
47 | 152 | CC BY-SA | A Splattershot split so every part prints in one color, joined with printed pins |
| 10 |
Splat Dualies (as seen in game!) by Cobaltlfynt |
45 | 143 | CC BY-SA | Splat Dualies made for a cosplay, with a trigger guard so you can spin them |
Likes and downloads are Printables' counts on October 1, 2026. CC BY-NC files are free for personal prints but not for selling prints, and ND files can't be remixed and shared.
Weapons for cosplay
- Coleidea's Splatana Stamper prints whole on a 23 x 23 cm bed, in a full size, a mini for the Splatoon Figma, or with a TPU belt as a working stamp. Use colored filament rather than paint, which can jam the moving parts.
- danik2119's Splattershot is split so every part prints in one color, joined with printed pins; Christof's is a small 170 x 120 x 60 mm version for children.
- Cobaltlfynt modeled the Splat Dualies in Onshape from the in-game model for a cosplay, adding a trigger guard so you can spin them; ARGO Workshop's Dapple Dualies need supports.
- esoterictriangle's Splat Roller rolls and folds, and their Torpedo moves too.
A dab of gel super glue helps on the fixed joints (not the propeller on the Torpedo).
Headgear and figures
monsoonery's Squid Hairclip is wearable: green, black and white PLA with filament swaps at 2.6 and 3.4 mm, glued to a large hair clip. Their Squid Bumper is about 45 mm tall and CC0, Cobaltlfynt remixed a Mr. Grizz statue with its antenna. Paint figures with the Army Painter Warpaints Fanatic starter set.
Keychains, coasters and gifts
theHeig's squid keychain gets its colors from changes at set layers, single or double sided. zapp's coaster has an 82 mm inner circle that's only 1 mm thick, so don't scale the height much. Snorkeltorkel made a Splatoon cookie cutter, Cobaltlfynt a Squee-G, and AK Weber a canister scaled to 120% with color from mid-print filament changes. The Splatoon print library lists all 72 files.
More Nintendo rankings: Super Mario, Pokemon, Animal Crossing and Kirby.
FAQ
What is the most popular Splatoon 3D print?
zapp's ink drop coaster on Printables, with 188 likes; its inner circle is about 82 mm so big mugs fit.
Can I 3D print Splatoon weapons?
Yes: Coleidea's Splatana Stamper (full size, Figma size or a working stamp), danik2119's Splattershot, Cobaltlfynt's cosplay Splat Dualies, ARGO Workshop's Dapple Dualies and esoterictriangle's folding Splat Roller.
Is there Splatoon headgear to print?
monsoonery's Squid Hairclip is wearable: print it with filament swaps for green, black and white and glue it to a large hair clip.
Is there a Splatoon blaster for kids?
Christof's Splattershot is a small version, 170 x 120 x 60 mm, designed for children and quick to print.
As an Amazon Associate I earn from qualifying purchases. The Amazon links on this page are affiliate links: check the current price and details on Amazon before you buy.
PropBuilds is a fan-run site, not affiliated with or endorsed by the studios or rights holders of the games mentioned.
Header photo: Splat Roller (Splatoon 3) by esoterictriangle on Printables, licensed CC BY-SA; cropped, with an overlay added. The edited header is shared under the same licence.
