// Contents
PropBuilds earns a commission if you buy through links on this page, at no extra cost to you.
The most-liked Kirby to 3D print is CalebTimoteo's pen holder and plant pot, with 711 likes on Printables, and it needs no supports. The second is the most useful: bulbasaur0's Kirby fume extractor for a 120 mm fan. For a first print, RustyFuzzdoor's sitting Kirby is quick, support-free and CC0.
How we ranked them. The PropBuilds Kirby print library lists 71 files, all on Printables. We read every one live on October 1, 2026 and ranked them by likes. Every note comes from the designer's description.
The ten most-liked Kirby files
| # | File | Likes | Downloads | License | Good to know |
|---|---|---|---|---|---|
| 1 |
Kirby - Pen Holder/Pot Plant by CalebTimoteo |
711 | 2,549 | CC BY-NC | A Kirby pen holder or plant pot; no supports needed |
| 2 |
Kirby Fume Extractor for 120mm Fan (remix) by bulbasaur0 |
383 | 789 | CC BY | A Kirby fume extractor scaled up for a 120 mm fan; screws or heat-set inserts hold the fan |
| 3 |
Kirby Sitting(EASY PRINT) by RustyFuzzdoor |
324 | 4,455 | CC0 (public domain) | A quick, easy sitting Kirby with no supports; CC0 |
| 4 |
Kirby Planter/Decor Bowl by fonzy |
290 | 637 | CC BY-NC-ND | A planter bowl: Kirby on a star, with three pot versions |
| 5 |
Waddle Dee (Kirby) by Lazlo |
175 | 911 | CC BY-NC | Waddle Dee, bandana and all |
| 6 |
Kirby by Caleb Hopkins |
173 | 2,121 | CC BY-NC-SA | Kirby painted for multicolor in the slicer; supports only between the legs |
| 7 |
Multicolor Multipart Kirby (No MMU) by GLeZz |
154 | 659 | CC BY-NC | Multicolor Kirby printed in parts that snap together without an MMU; tolerances are tight |
| 8 |
Kirby inspired, Kirby, Tabletop DnD miniature by PixelChroniclesMiniatures |
150 | 1,444 | CC BY | Kirby as a tabletop miniature on a 25 mm base |
| 9 |
Pencil Cup Kirby by Darkness |
141 | 753 | CC BY-ND | A simple Kirby pencil cup |
| 10 |
Kirby V2 by BODY3D |
124 | 1,580 | CC BY | Kirby in a new pose; there's a no-supports version too |
Likes and downloads are Printables' counts on October 1, 2026. CC BY-NC files are free for personal prints but not for selling prints, and ND files can't be remixed and shared.
Useful Kirbys
bulbasaur0 scaled up Chris Borge's Kirby fume extractor to take a 120 mm fan without trimming, with options for screws or heat-set inserts; a heat-set insert kit with a soldering iron covers the second route. CalebTimoteo's pen holder doubles as a plant pot, fonzy's planter bowl puts Kirby on a star, and Darkness has a simple pencil cup.
Kirby figures
RustyFuzzdoor's sitting Kirby is the easy one (0.1 mm layers, no supports). For color, GLeZz's prints in separate colored parts that fit together without an MMU or glue, and Bryan JF's Forgotten Land gacha Kirby is 19 parts, about 11 x 11 x 9.5 cm assembled. Caleb Hopkins' Kirby is painted for multicolor in the slicer, BODY3D has a new pose plus a no-supports version, and Lazlo made Waddle Dees. Tabletop players get a Kirby miniature on a 25 mm base. For painted figures, the Army Painter Warpaints Fanatic starter set has 11 paints.
The Kirby print library lists all 71 files.
More Nintendo rankings: Super Mario, Pokemon and Animal Crossing.
FAQ
What is the best Kirby to 3D print?
By likes, CalebTimoteo's Kirby pen holder and plant pot on Printables (711 likes), which needs no supports. RustyFuzzdoor's sitting Kirby is the most downloaded of the top ones (4,455) and is CC0.
Is there an easy Kirby to print with no supports?
Yes: RustyFuzzdoor's sitting Kirby, CalebTimoteo's pen holder and BODY3D's no-supports Kirby all print without supports.
Can I print a multicolor Kirby without an MMU?
GLeZz's Kirby prints in separate colored parts that assemble without glue, so no multi-material unit is needed; the tolerances are tight, so your printer needs to be well tuned. Bryan JF's Forgotten Land gacha Kirby is 19 parts in different colors.
What useful Kirby can I print?
A pen holder or plant pot, a pencil cup, a planter bowl, and bulbasaur0's fume extractor for soldering, which takes a 120 mm fan.
As an Amazon Associate I earn from qualifying purchases. The Amazon links on this page are affiliate links: check the current price and details on Amazon before you buy.
PropBuilds is a fan-run site, not affiliated with or endorsed by the studios or rights holders of the games mentioned.
Header photo: Kirby Sitting (EASY PRINT) by RustyFuzzdoor on Printables, licensed CC0; cropped, with an overlay added.