// Contents
PropBuilds earns a commission if you buy through links on this page, at no extra cost to you.
The most-liked Genshin Impact file to 3D print is Peter Farell's Eula, with 220 likes on Printables, and walldodge's Mora coin is the most downloaded. The library is smaller than most, but it has full-size cosplay weapons, including Hu Tao's Staff of Homa, and some good lamps.
How we ranked them. The PropBuilds Genshin Impact print library lists 157 files, all on Printables. We read every one live on October 1, 2026 and ranked them by likes. Every note comes from the designer's description.
The ten most-liked Genshin Impact files
| # | File | Likes | Downloads | License | Good to know |
|---|---|---|---|---|---|
| 1 |
Eula - Genshin Impact by Peter Farell |
220 | 1,619 | CC BY-NC | A Eula figure, the most-liked file in the library |
| 2 |
Mistsplitter by MartinWAF |
215 | 1,008 | CC BY-NC | The Mistsplitter sword, made for cosplay, in parts that fit a 270 x 200 mm bed |
| 3 |
Mona Genshin Impact by maxymczech |
210 | 1,376 | CC BY-NC-SA | A 1/7 scale Mona, about 23 cm tall in 13 parts |
| 4 |
Mora Coin - Genshin Impact by walldodge |
195 | 1,940 | CC BY-NC-SA | The Mora coin, split in half to print without supports; the most downloaded file in the library |
| 5 |
Genshin Impact Shoji Lamp #1 by Dr Swaster |
194 | 417 | CC BY-NC-SA | A shoji lamp from the game, a prototype for a walnut version |
| 6 |
TCG Dice from Genshin Impact by Render Beetle |
184 | 1,103 | CC0 (public domain) | The dice from the game's Trading Card Game, recreated in Fusion 360 |
| 7 |
Barbra Genshin Impact by Peter Farell |
161 | 1,042 | CC BY | A Barbara figure |
| 8 |
Ningguang - Genshin Impact by Peter Farell |
157 | 1,243 | CC BY-NC | A Ningguang figure |
| 9 |
StormTerror Genshin Impact. by Peter Farell |
137 | 957 | CC BY-NC | Stormterror |
| 10 |
ALHAITHAM from Genshin Impact by FunserviceStl |
123 | 908 | CC BY-SA | An Alhaitham figure |
Likes and downloads are Printables' counts on October 1, 2026. CC BY-NC files are free for personal prints but not for selling prints; ND files can't be remixed and shared, and Printables' standard license doesn't allow reposting.
Weapons for cosplay
- mcasteels' Staff of Homa is life-size, cut into printable pieces and glued, with a wooden broom stick for the shaft; Bady's version is 400 mm and CC0.
- MartinWAF's Mistsplitter was made for cosplay, in parts that fit a 270 x 200 mm bed.
- Alesmagra's Festering Desire is life size (1 m), assembled on an 80 cm M8 rod with glue, and comes with a wall mount.
Prime blades with filler and sandable primer, glue parts with gel super glue, and paint with the Army Painter Warpaints Fanatic starter set.
Figures
Peter Farell made Eula, Barbara (CC BY), Ningguang and Stormterror. maxymczech's Mona is a 1/7 scale figure about 23 cm tall in 13 parts, FunserviceStl's Alhaitham is CC BY-SA, and Grzegorz' Boo Tao is Hu Tao's ghost on a base.
Lamps, dice and gifts
Dr Swaster's shoji lamps come from the game; the second is a simpler build that takes a standard bulb (CC BY-SA), and bstabens' lantern is inspired by Liyue's. walldodge's Mora coin splits in half to print without supports, Render Beetle's card game dice are CC0, Velent's Casket of Tomes holds cards 45 x 63.5 mm, Multiplew's element earrings work as pendants too, Alesmagra's hilichurl phone stand has arms that widen for tablets, and grzegorz' Vision shapes load into the PrusaSlicer gallery (CC0). The Genshin Impact print library lists all 157 files.
More RPG rankings: Final Fantasy and League of Legends.
FAQ
What is the most popular Genshin Impact 3D print?
Peter Farell's Eula on Printables, with 220 likes, the most of all 157 Genshin files in our index. walldodge's Mora coin is the most downloaded (1,940).
Can I 3D print the Staff of Homa?
Yes. mcasteels' life-size Staff of Homa is cut into printable pieces and uses a wooden broom stick as the shaft, and Bady's 400 mm version is CC0.
Are there Genshin weapons for cosplay?
MartinWAF's Mistsplitter is made for cosplay, Alesmagra's Festering Desire is life size (1 m) on an 80 cm M8 rod with a wall mount, and the Staff of Homa comes life-size or at 400 mm.
What Genshin gifts can I print?
Dr Swaster's shoji lamps, Render Beetle's CC0 card game dice, Velent's Casket of Tomes card case, Multiplew's element earrings, Grzegorz' Boo Tao ghost and Alesmagra's hilichurl phone stand.
As an Amazon Associate I earn from qualifying purchases. The Amazon links on this page are affiliate links: check the current price and details on Amazon before you buy.
PropBuilds is a fan-run site, not affiliated with or endorsed by the studios or rights holders of the games mentioned.
Header photo: Genshin Impact Shoji Lamp #2 by Dr Swaster on Printables, licensed CC BY-SA; cropped, with an overlay added. The edited header is shared under the same licence.
