// Contents
PropBuilds earns a commission if you buy through links on this page, at no extra cost to you.
The most-liked Final Fantasy file to 3D print is The Cyber Hobbit's low-poly Cloud Strife, with 523 likes and 3,581 downloads on Printables, and the same designer's FF7 party takes six of the top ten spots. Buster Swords and gunblades are the props to print.
How we ranked them. The PropBuilds Final Fantasy print library lists 203 files, all on Printables. We read every one live on October 1, 2026 and ranked them by likes. Every note comes from the designer's description.
The ten most-liked Final Fantasy files
| # | File | Likes | Downloads | License | Good to know |
|---|---|---|---|---|---|
| 1 |
Cloud Strife - Final Fantasy 7 Polygon Model by The Cyber Hobbit |
523 | 3,581 | CC BY | Low-poly Cloud, printed at 15% scale, with a Buster Sword; the most-liked and most downloaded file in the library |
| 2 |
Tifa Lockhart - Final Fantasy 7 - Fan Art by Printed Obsession |
486 | 3,386 | CC BY-NC-ND | A Tifa Lockhart sculpture |
| 3 |
Buster Sword for dummy 13 -Final Fantasy by Eastlee |
334 | 2,138 | CC BY-NC | A Buster Sword for the Dummy 13 figure; the designer says SLA does it better |
| 4 |
Final Fantasy IX - Vivi Ornitier (Fan Art) by FredrikNorberg |
251 | 1,647 | CC BY-NC-ND | Vivi from Final Fantasy IX; print the legs with more infill and the head with less so it balances |
| 5 |
Sephiroth - Final Fantasy 7 Polygon Model by The Cyber Hobbit |
217 | 1,425 | CC BY | Low-poly Sephiroth, with a spare file for the tricky front hair |
| 6 |
Tifa Lockhart - Final Fantasy 7 Polygon Model by The Cyber Hobbit |
214 | 1,398 | CC BY | Low-poly Tifa at the same 15% scale |
| 7 |
Aerith Gainsborough - Final Fantasy 7 Polygon Model by The Cyber Hobbit |
203 | 1,172 | CC BY | Low-poly Aerith; her ribbons are too thin to print, so there is a thicker ribbon file |
| 8 |
Red XIII - Final Fantasy 7 Polygon Model by The Cyber Hobbit |
198 | 1,122 | CC BY | Low-poly Red XIII |
| 9 |
DND BUSTER SWORD DICE HOLDER by thatcaddad |
191 | 593 | CC BY-NC | A Buster Sword dice box with 2 compartments, printed without supports; needs 6 magnets (8x2 mm) |
| 10 |
Barret Wallace - Final Fantasy 7 Polygon Model by The Cyber Hobbit |
171 | 1,000 | CC BY | Low-poly Barret |
Likes and downloads are Printables' counts on October 1, 2026. CC BY-NC files are free for personal prints but not for selling prints; ND files can't be remixed and shared, and Printables' standard license doesn't allow reposting.
The FF7 party in low poly
The Cyber Hobbit made the whole party as polygon figures at matching scale (printed at 15%), all CC BY: Cloud with his Buster Sword, Sephiroth, Tifa, Aerith, Red XIII, Barret, Vincent, Cait Sith and Yuffie. Where parts are too thin to print, like Aerith's ribbon and Cait Sith's wings and cape, there are extra files already scaled to match. Paint the eyes and details with the Army Painter Warpaints Fanatic starter set.
Printed Obsession's Tifa sculpture is second overall, and FredrikNorberg's Vivi balances best with more infill in the legs than the head.
Buster Swords
- Shabubu's Final Fantasy VII Remake Buster Sword is 170 cm long, prints in two colors on a dual extruder so it needs no paint, and takes an M8 threaded rod through the handle and guard for strength.
- KC Ortiz's Zack Buster Sword and TWoods93's are smaller display models (both CC BY), and TWoods93's Sharpie Buster Sword holds a marker as the grip.
- For figures: Eastlee's Dummy 13 sword, p3rr1ff3ry's Lucky 13 sword (CC BY) and StickyRib's three-part Cloud skin for Lucky 13.
For 28 Buster Sword files sorted by use, see our Buster Sword guide.
Gunblades and Lightning's saber
KC Ortiz's Squall gunblade is split for smaller printers and into its colors, so it needs no paint; assemble it with super glue. Adafruit's cosplay gunblade has an outline you edit to fit your hand (CC BY-SA), and Bruce3D's Lionheart prints without supports and goes together with pins and glue. Psinuxi's full size Blazefire Saber from Final Fantasy XIII adds inserts to strengthen the joints (CC BY-SA). Fill seams with filler and sandable primer before paint.
Gifts
thatcaddad's Buster Sword dice box has two compartments and prints without supports. Malichi188's job class coasters are CC0 with a holder for four, CavalierLabs' Cactuar watering can actually works, and Hexadeciball's Cactuar planter fits a 4-inch nursery pot. Merla3D's Bomb is CC0, JS-studio's chocobo comes in five poses, Lee's chocobo chick is a filament test print, Anders' chibi chocobo is a tree ornament, PixelChroniclesMiniatures' Stiltzkin Moogle is a tabletop miniature and RaistlinJ's FF7 ring comes sprued or not. The Final Fantasy print library lists all 203 files.
More RPG rankings: The Witcher and Elden Ring.
FAQ
What is the most popular Final Fantasy 3D print?
The Cyber Hobbit's low-poly Cloud Strife on Printables, with 523 likes and 3,581 downloads, the most of all 203 Final Fantasy files in our index. The same designer has the rest of the FF7 party, all CC BY.
Can I 3D print a full size Buster Sword?
Shabubu's Final Fantasy VII Remake Buster Sword is 170 cm long, prints in two colors so it needs no paint, and has room for an M8 threaded rod for strength. Smaller versions fit the Dummy 13 and Lucky 13 figures.
Is there a gunblade to print?
KC Ortiz's Squall gunblade splits for smaller printers and prints in its colors, Adafruit's is CC BY-SA with an outline you can fit to your hand, and Bruce3D's Lionheart needs no supports.
What Final Fantasy gifts can I print?
Malichi188's CC0 job class coasters, CavalierLabs' working Cactuar watering can, a Cactuar planter for 4-inch pots, chocobos, a Moogle miniature and thatcaddad's Buster Sword dice box.
As an Amazon Associate I earn from qualifying purchases. The Amazon links on this page are affiliate links: check the current price and details on Amazon before you buy.
PropBuilds is a fan-run site, not affiliated with or endorsed by the studios or rights holders of the games mentioned.
Header photo: Cloud Strife - Final Fantasy 7 Polygon Model by The Cyber Hobbit on Printables, licensed CC BY; cropped, with an overlay added.