@SometimesLone

The Most-Liked Hello Kitty 3D Print Files, Ranked (Free)

Nov 10, 2026 · 4 MIN READ

PropBuilds earns a commission if you buy through links on this page, at no extra cost to you.

The most-liked Hello Kitty 3D print on Printables is welbot's simple Hello Kitty figure, with 707 likes and 15,827 downloads. Desk holders, cookie cutters and planters fill most of the rest of the top ten, so this is a library of small, useful gifts as much as figures.

How we ranked them. The PropBuilds Hello Kitty print library lists 284 files, all on Printables. We read each one live on October 3, 2026 and ranked them by likes. Every note comes from the designer's own description. We left out re-uploads of other people's files and a 3D scan of a figure.

The ten most-liked Hello Kitty files

#	File	Likes	Downloads	License	Good to know
1	Hello Kitty by welbot	707	15,827	CC BY	A simple Hello Kitty figure that should print without supports; the most downloaded file in the library
2	Hello Kitty Pencil/Paint Brush Holder/Container by orangethanos	385	4,805	CC BY	Hello Kitty as a pencil or paint brush holder; supports needed
3	Sanrio Cookie Cutter Set - Hello Kitty - My Melody - Kuromi by 3D Trece	372	2,659	CC BY	About 75 mm cookie cutters, a cutter and a stamp each: Hello Kitty, My Melody, Kuromi and Badtz-Maru
4	Stitch im Hello-Kitty-Kostüm by MarcellosPrintHub	336	1,797	CC BY-NC	Stitch dressed as Hello Kitty, pink bow and all
5	Hello Kitty Desk Organizer by Decorartor	321	1,841	Printables standard	A pink Hello Kitty pen holder with her bow
6	Hello Kitty - Pot Plant by CalebTimoteo	313	1,980	CC BY	A Hello Kitty head planter; a version without the drain hole works as a container
7	hello kitty remix by dav88	309	6,659	CC BY	A remix of a Hello Kitty model with the ears fixed
8	Hello Kitty Planter - High Poly Version by Creeju	266	1,909	CC BY-NC	A Hello Kitty planter re-created from scratch in high poly
9	Hello Kitty Planter - now small and medium size! by eponra	258	1,435	CC BY-NC-SA	A small Hello Kitty planter, now in small and medium sizes
10	Kuromi by 32Walls	254	6,739	CC BY-NC	A Kuromi figure

Likes and downloads are Printables' counts on October 3, 2026. CC BY-NC files are free for personal prints but not for selling prints.

Kuromi, My Melody, Cinnamoroll and friends

3D Trece’s first cookie cutter set covers Hello Kitty, My Melody, Kuromi and Badtz-Maru, and their second set adds Pompompurin, Cinnamoroll, Pochacco and Hangyodon. Each cutter is about 75 mm, with a separate stamp for the details.
Alexandre Martins’s Kuromi pendant prints in three colors and the My Melody pendant in four, with pauses to swap filament.
Mr. Matt Makes Stuff’s Cinnamoroll keychains were made for the designer's daughter: pause and swap filament, or use an MMU. pantevi _’s Pompompurin keychain is an easy print too.

For the desk and the home

orangethanos’s brush holder was made for a roommate's paint brushes, and Decorartor’s desk organizer is a pink pen holder with her bow.
CalebTimoteo’s head planter has a no-hole version for use as a container; Creeju’s high-poly planter and eponra’s planter are the other two in the top ten.
Smart3d By Gabriel Gomes’s Hello Kitty lamp is public domain (CC0). Jason M.’s light switch cover was made for a 5 V low-voltage switch, and the designer warns to mind the material's fire rating if you use it on mains voltage.
Triple G Workshop’s chip clip is one size fits all and needs no supports.

Gifts

Naiqui Armendariz’s Christmas ornament is a public domain (CC0) remix with a ring on top.
MarcellosPrintHub’s Stitch in a Hello Kitty costume is a crossover with a pink bow.
UpInAtoms’s volleyball Hello Kitty was made for a friend who loves the sport.

Rather buy one finished?

No printer, or no time to print before the holidays? These finished Hello Kitty pieces are sold on Amazon. Check the current price on Amazon before you buy.

a Hello Kitty and Friends plush bouquet with nine plush.
a 10-inch Hello Kitty Squishmallow.
a 10-inch Kuromi Squishmallow for Kuromi fans.

These Amazon links are affiliate links: PropBuilds earns a commission if you buy through them, at no extra cost to you.

Find every file

The Hello Kitty print library has all 284 files with filters, and the game and movie props hub links every other library.

FAQ

Where can I find Hello Kitty 3D print files?

The PropBuilds Hello Kitty print library links 284 files, all free on Printables, each linked to the creator's own page. This ranking picks out the most-liked ones by Printables likes.

Are there Kuromi, My Melody and Cinnamoroll files too?

Yes. The library covers the Sanrio characters: there are Kuromi figures, keychains and a pendant, a My Melody pendant, Cinnamoroll keychains, and two cookie cutter sets that cover eight characters between them.

Is there a Hello Kitty planter to 3D print?

Several. CalebTimoteo's head planter has a version without the drain hole, Creeju re-created the planter in high poly, and eponra's comes in small and medium sizes.

Are there Hello Kitty Christmas files?

Naiqui Armendariz's Hello Kitty Christmas ornament is a public domain (CC0) remix with a ring on top, and both cookie cutter sets suit holiday baking.

Can I sell prints of Hello Kitty files?

Check each file's license first: 118 of the 279 files we read are CC BY-NC (no selling prints) and 40 use Printables' standard license, which doesn't allow reposting or selling; 49 are public domain (CC0). Separately, Hello Kitty and the Sanrio characters belong to Sanrio. This is not legal advice.

As an Amazon Associate I earn from qualifying purchases. The Amazon links on this page are affiliate links: check the current price and details on Amazon before you buy.

PropBuilds is a fan-run site, not affiliated with or endorsed by the studios or rights holders of the games mentioned.

Header photo: Hello Kitty planter by CalebTimoteo on Printables, licensed CC BY; cropped, with an overlay added.