// Contents
Square Enix's KINGDOM HEARTS Collection [I~III] comes out on October 8, 2026, on Nintendo Switch 2, PlayStation 5, Xbox Series X|S and PC via the Microsoft Store, according to its press release. If that sends you back to Sora, our Kingdom Hearts print library has 62 free files, 29 of them keyblades by title. Here are the highlights, with Printables likes as of 30 September 2026. What each file does comes from its creator's own summary.
The Kingdom Key
The most-liked keyblade file is Adafruit's Kingdom Key - Yet Another Keyblade (556 likes), with parts sized for a 250 by 210 by 210 mm bed. KCOrtiz's Kingdom Keyblade (270) is a cosplay prop you glue together, and CodeMinion's Sora's Keyblade (131) assembles to 922 mm tall, per its listing. Kingdom Key Keyblade by electricmasq (40) is described as a full-scale replica, and XavierMarquet's Kingdom Hearts Keyblade (207) was designed full scale and printed at 30% by its creator.
Other keyblades
KCOrtiz also made Aqua's Rainfell Keyblade from Birth by Sleep (127 likes) and a Metal Chocobo Keyblade (81) split up for smaller printers. There is a Gazing Eye KeyBlade (48), a Starlight Keyblade (39) and a Void Gear (25). For a figure, there is a Kingdom Key for Dummy 13 (71).
Lights and sound
Adafruit's Prop-Maker Keyblade (79 likes) is a keyblade-inspired prop with lights and sound effects, built around its Prop-Maker FeatherWing board.
Beyond the keyblade
Sora Crown Necklace (48 likes) prints in one piece, Kingdom Hearts Wayfinder (37) prints without supports, and Kingdom Hearts 1 Treasure Chest (161) is modelled on the Traverse Town chest from the first game.
If you would rather buy one finished, our Kingdom Hearts keyblade replicas page compares them, and Kingdom Hearts physical props lists finished ones from Greencade. More files in the Kingdom Hearts print library.
FAQ
Can you 3D print Sora's keyblade?
Yes. Kingdom Key - Yet Another Keyblade by Adafruit has 556 likes on Printables, and CodeMinion's Sora's Keyblade assembles to 922 mm tall, according to its listing.
Is there a full-size keyblade to 3D print?
Yes. Kingdom Key Keyblade by electricmasq (40 likes) is described as a full-scale replica, and Sora's Keyblade by CodeMinion lists an assembled height of 922 mm.
Is there an Oathkeeper keyblade to 3D print?
Not in our library: none of the 29 keyblade files in it on 30 September 2026 is an Oathkeeper.
Fan-made files belong to their creators. PropBuilds is not affiliated with Disney or Square Enix, and Kingdom Hearts and all related names belong to them.
Header photo: Kingdom Key - Yet Another Keyblade by Adafruit on Printables, licensed CC-BY; cropped, with an overlay added.