// Contents
Cloud's Buster Sword comes in every size, from a sword you can carry at a convention to one that fits on a keyring. It is also the item our Final Fantasy print library has the most files for: 28 of its 203 free files name it, against 11 for the Chocobo, 11 for the Cactuar and 11 for Sephiroth. Here they are by what you want to do with one, with Printables likes as of 30 September 2026. What each file is comes from its own title and its creator's summary.
Swords to hold or hang
Leaving out the figure-sized ones, the most-liked sword is Buster Sword (FFVIIR) - No Paint Edition (Multiple Extruder) by Shabubu (129 likes), a Final Fantasy VII Remake version that its creator remixed for a dual extruder so it needs no painting. The same designer made a wall mount shaped like Materia (39) to hang it on. Zack's Buster Sword (Final Fantasy 7 & Crisis Core) (120) models the sword as Zack Fair carried it in Crisis Core, before it passed to Cloud.
If you want to carry it, two creators built for strength: TimSpringer's Buster Sword (18) is a sectioned prop sword with a dowel stiffener, and Stronger Buster Sword (6) exists, in its creator's words, because "the full-size one broke". Check each listing for the printed length and the parts list before you start.
For Dummy 13 and other figures
The most-liked Buster Sword file of all is Buster Sword for dummy 13 - Final Fantasy by EastLee (333 likes), sized for the printable Dummy 13 figure. There is also a split version for Dummy 13 (47), a Lucky 13 Buster Sword (72) and one sized for HG and RG Gunpla (2).
On the desk
DND BUSTER SWORD DICE HOLDER by thatcaddad (190 likes) holds your dice. Sharpie Buster Sword (79) is, in its creator's words, "the most impractical way to use a sharpie", and the same creator made a Buster Sword standee (13) with a flat edge for a desk. There is a Buster Sword in the stone (12), a mini Buster Sword (4) that its creator says can cut box tape and open letters, and a bobby pin holder (3) that doubles as a bookmark.
Keychains and pendants
Buster Sword Keychain (11 likes), a two-colour pendant (7, gluing required) and Cloud's Buster Sword Pendant (2, with a hole for a keyring).
More in the Final Fantasy print library, and every other game and film we catalog is in the props by game and film directory. For a big print, the 3D print cost calculator gives a rough filament cost first.
FAQ
Is there a full-size Buster Sword to 3D print?
Yes. For carrying, TimSpringer's sectioned Buster Sword uses a dowel stiffener, and Stronger Buster Sword was made after its creator's full-size print broke. The most-liked sword that is not figure-sized, Buster Sword (FFVIIR) - No Paint Edition (129 likes), does not give its size in its summary, so check each listing for the printed length.
Is there a Buster Sword for Dummy 13?
Yes. Buster Sword for dummy 13 - Final Fantasy by EastLee has 333 likes, the most of any Buster Sword file in our library, and there is a split version and a Lucky 13 version too.
Is there a collapsing Buster Sword to 3D print?
Not in our library: none of the 28 Buster Sword files in it on 30 September 2026 is titled as collapsing, telescoping or folding.
Is there a Buster Sword keychain to 3D print?
Yes. Buster Sword Keychain by ItsNeON (11 likes), plus two pendants, one of them with a hole for a keyring.
Fan-made files belong to their creators. PropBuilds is not affiliated with Square Enix, and Final Fantasy and all related names belong to Square Enix.