Christmas Ornaments to 3D Print From Star Wars, Harry Potter, Mario and More (Free Files)

PropBuilds earns a commission if you buy through links on this page, at no extra cost to you.

The most-liked pop culture Christmas ornament on Printables is basti30's snowflake X-wing kit card, with 4,120 likes. Vlado Turek's Grinch for Prusa is close behind with 3,153, and Star Wars, Harry Potter, Nintendo and Disney fill most of the rest. Below are the best of them, plus tree toppers, cookie cutters and decorations, each linked to the creator's own page.

The 15 most-liked Christmas files

Likes are Printables' counts on October 3, 2026. CC BY-NC files are free for personal prints but not for selling prints.

Tree toppers

• Marcuzzi420’s Super Mario star is sized for a small tree but scales up, and Bridget’s 8-bit star uses color changes: black, then orange, then yellow.
• TomHoogeveen’s Gandalf staff was made to give a tree a Lord of the Rings look, and it is public domain (CC0).
• Richard’s DemoStar is a Demogorgon star for Stranger Things fans, and Reddaux’s Godzilla topper comes in three dovetailed parts.

Star Wars and Harry Potter

• basti30’s snowflake X-wing is a kit card, made to pair with a snowflake TIE Fighter. Margel’s Death Star ball prints fine at 10% infill, and Tim Hatch’s Death Star lights up from inside. CalebTimoteo’s Millennium Falcon needs supports.
• Pixelception Design’s Snitch is a kit card you assemble, 3DPrintBunny’s Hogwarts bauble prints without supports, and razandersen’s tags double as pendants or keychains.
• More in the Star Wars and Harry Potter libraries.

Nintendo, Pokémon and other games

• 3DPrintBunny’s Mario ornament slots together with no supports, glue or paint, and techgems’s mushroom is built on 3DPrinty's twist-open mushroom.
• 3DPrintBunny’s Zelda silhouettes need no supports; J12Meeks’s Korok prints best scaled to about 75%.
• Maple 3D Printing’s Mew has an ornamental style, and CalebTimoteo’s Pokémon balls cover Pikachu, Bulbasaur, Charmander and Squirtle.
• 3DPrintBunny’s D&D ornament is about 9 cm tall, darzar’s Santa Creeper is a Minecraft decoration, 4kicks’s Among Us ghost is dressed as a tree, A Skewed View 3D’s Pac-Man ghost needs no supports, Anders’s chibi Chocobo is for Final Fantasy fans, and TinyWelt3d’s Hornet bauble recreates Silksong's opening scene with Hornet trapped in a carriage.

Disney, Marvel and films

• The Grinch, Deadpool and Jack Skellington are all Vlado Turek designs from Prusa's ornament collection. A Skewed View 3D’s Jack prints without supports.
• Emmanuel Linares’s Mickey sphere is about 3 inches plus ears and prints in two parts; Poison Apple Prints’ Stitch has ornamental patterns, and Salvadori3D’s Eeyore is a Winnie the Pooh ornament.
• PhaseworksCA’s low-poly Baby Groot comes with a stand, Ak_fx’s Toothless is a festive How to Train Your Dragon model, and Decorartor’s Minion has four parts for color printing.
• nerdyviews’s proton pack adds a hanging hook to the New Hobbyist's scale model, and Razor’s Godzilla vs Santa is public domain (CC0).
• Acgames’s KPop Demon Hunters dresses Zoey, Mira and Rumi for Christmas, at a recommended 200 mm.

TV and anime

• 3DPrintBunny’s Game of Thrones and Star Trek ornaments print with no supports, and MrHanjak’s Doctor Who set is in the library too.
• Skyward’s Snoopy doghouse comes with a hanging hole or without one for a shelf, and it is public domain (CC0); Salvadori3D’s Snoopy and Woodstock hug on the tree.
• Design Slice Print’s Pickle Rick is a multicolor remix of MerganMcFergan's ornament, BODY3D’s SpongeBob needs no supports, PiNK_3DP’s Ninja Turtle says Cowabunga, Odd Planet Studio’s Bluey and Bingo come in three variants including a holiday one, and Naiqui Armendariz’s Hello Kitty is public domain (CC0).
• Alex Gassaway’s Totoro came from a 25 ornaments in 25 days challenge, and CalebTimoteo’s Pochita needs supports.

Decorations and Christmas baking

• The Grinch has a countdown calendar, a candy bowl and a wall decoration that is a fast one-color print.
• Bill Kobertz’s Charlie Brown Christmas tree is the scrawny tree with Linus's blanket around the base.
• For the elf: Allpa’s footprint templates (three kinds) and 10 mm cookie cutters sized for an Elf on the Shelf.
• Cookie cutters: Coarse’s Bluey and lizard_e_’s Mickey gingerbread, inspired by the Disney parks' holiday cookies.
• Mfann72’s ornament hangs one of your own Hot Wheels or Matchbox cars on the tree (CC0), and Peter Farell’s Shrek comes with the Gingerbread Man.

Find more

Every file above comes from a PropBuilds print library. The biggest Christmas sets are in these libraries: The Grinch, The Nightmare Before Christmas, Peanuts and Elf on the Shelf. The A to Z directory lists them all.

FAQ

What are the most popular pop culture Christmas ornaments to 3D print?

By Printables likes on October 3, 2026: basti30's snowflake X-wing kit card (4,120 likes), Vlado Turek's Grinch ornament for Prusa (3,153), a Death Star tree ball, the Millennium Falcon and a Golden Snitch kit card.

Can I 3D print a Christmas tree topper?

Yes. There is a Super Mario star (sized for a small tree, but scalable), an 8-bit Mario star, Gandalf's staff (public domain, CC0), a Stranger Things Demogorgon star and a Godzilla topper in three dovetailed parts.

Which of these ornaments print without supports?

3DPrintBunny's Mario, Hogwarts, Game of Thrones, Zelda and Star Trek ornaments, A Skewed View 3D's Jack Skellington and Pac-Man ghost, and BODY3D's SpongeBob all print without supports, according to their designers. The Millennium Falcon, the Pokémon balls and Pochita need them.

Is there a light-up 3D printed ornament?

Tim Hatch's Death Star ornament lights up from inside with two LEDs and battery holders, and it is public domain (CC0).

Can I sell prints of these ornaments?

Check each file's license first: 31 of these 59 files are CC BY-NC (no selling prints) and 10 use Printables' standard license, which doesn't allow reposting or selling. Separately, every character here belongs to its studio or publisher. This is not legal advice.

As an Amazon Associate I earn from qualifying purchases. The Amazon links on this page are affiliate links: check the current price and details on Amazon before you buy.

PropBuilds is a fan-run site, not affiliated with or endorsed by the studios or rights holders of the games mentioned.

Header photo: Grinch ornament by Vlado Turek for Prusa Research on Printables, licensed CC BY-SA; cropped, with an overlay added. The edited header is shared under the same licence.