ROKR MODEL KITS: BUILD IT, THEN USE IT

ROKR mechanical kits, picked for makers.

ROKR is Robotime's line of build-it-yourself mechanical models: a pinball table you can play, a projector that shows a film, a gramophone that plays records. The parts come pre-cut, so no 3D printer is needed. This page picks the kits from Robotime's own store that suit someone who likes props and working models, all in stock on November 17, 2026. PropBuilds has not built these kits, so every detail here is Robotime's own.

PropBuilds earns a commission if you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.

THE SHORT VERSION

  • ROKR and Rolife are Robotime brands. ROKR makes mechanical models. Rolife makes miniature rooms and book nooks.
  • Several kits work when built: the pinball table plays, the projector shows a film and the gramophone plays 7-inch and 10-inch records.
  • The marble runs turn by hand crank. Marble Night City has 2.5 meters of track.
  • Robotime states piece counts on some pages: 183 wood pieces for the projector and 193 pieces for the Mars Outpost marble run.

The kits

Thirteen kits Robotime's own store had in stock on November 17, 2026. Robotime's prices change often, so none are shown here. Each card opens the live product page.

Which one fits what you want

For something to play with after the build, choose the pinball table, the projector or the gramophone. For a desk or shelf display, choose the typewriter, the orrery or the Viking ship. For motion you can watch, choose a marble run. For a lower-cost first build or a gift, choose the treasure box or the ballista. For a bookshelf, the Rolife book nook slots in between the books. When it is built, the display guide covers stands, cases and light.

Six worth a closer look

The one you can play

ROKR 3D Pinball Machine (EG01)

Photo: Robotime

ROKR 3D Pinball Machine (EG01)

Playable / lights and sound / electronic scoring

A vintage-style pinball table with a retro circus theme. Robotime lists a working transmission, live sound and light effects, and electronic scoring. You pull the rod to launch the ball up the ramp, and a game starts with six plays. The parts join with mortise and tenon joints. Of the kits here, it is the closest to an arcade prop for a desk or shelf.

View on Robotime ↗

Affiliate link.

ROKR Vitascope Movie Projector (LK601)

Photo: Robotime

ROKR Vitascope Movie Projector (LK601)

183 wood pieces / hand crank / no battery

A model of an early film projector that works. Robotime says it has 183 wood pieces and comes with a black and white film. Turning the hand crank runs a small generator that powers the lamp, so it needs no battery. The focus and the projection angle adjust, and a door in the middle gives access to change the film.

View on Robotime ↗

Affiliate link.

ROKR Mechanical Typewriter (LK703B)

Photo: Robotime

ROKR Mechanical Typewriter (LK703B)

Wood and metal / moving keys / desk display

A vintage typewriter in wood and metal, with laser-engraved keys, typebars and platen. The keys and typebars move to copy the action of typing. Robotime states that the typing function is for entertainment only, so treat it as a display piece. It is sold in a Classic version and a Magic version.

View on Robotime ↗

Affiliate link.

ROKR Classic Gramophone (LKB01)

Photo: Robotime

ROKR Classic Gramophone (LKB01)

Plays records / hand crank or USB power / volume knob

A wooden gramophone that plays real records. It comes with one vinyl record with three tracks, and Robotime says it also plays other 7-inch and 10-inch records. You wind it by hand, or connect power to its micro USB port so the crank takes less effort. A knob sets the volume.

View on Robotime ↗

Affiliate link.

ROKR Marble Night City (LGA01)

Photo: Robotime

ROKR Marble Night City (LGA01)

Marble run / hand crank / 2.5 m of track

A marble run with tower distributors, a clear acrylic funnel and steel balls. Turn the handle and the balls travel around the track, down the slopes and turns. Robotime gives the total track length as 2.5 meters. If you prefer a science fiction look, the Mars Outpost run above has 193 pieces and LEDs that flash with sound.

View on Robotime ↗

Affiliate link.

ROKR Treasure Box (LK502)

Photo: Robotime

ROKR Treasure Box (LK502)

Combination lock / hidden compartment / small build

A small box for coins, dice or jewelry that locks. You set a three-digit code from the 810 combinations listed in the manual, then use the knob and the code to open it. The top lid has a second, hidden space under gears that turn. It was among the lowest-priced kits on this page when checked, which suits a first build or a gift.

View on Robotime ↗

Affiliate link.

FAQ

What are ROKR and Rolife?

Both are brands of Robotime. ROKR kits are mechanical models, mostly in pre-cut wood: marble runs, clocks, music boxes, vehicles and machines. Rolife kits are miniature rooms and book nooks, which are small lit scenes that sit between the books on a shelf.

Which kits do something when they are built?

The pinball table plays, with scoring. The Vitascope projects a film. The gramophone plays records. The treasure box locks with a code. The ballista fires with a trigger and rubber bands. Both marble runs carry balls around the track when you turn the crank.

Do the kits need batteries?

It depends on the kit. Robotime says the Vitascope projector needs none, because the hand crank powers its lamp. The gramophone works by hand crank or from USB power. The Steam Engine is battery powered. The Emperor Scorpion uses three AAA batteries, which Robotime says may not be in the box. Check the product page of any other kit before you order.

Why do the product pages mention wax?

Several ROKR pages note that, because of customs rules, the wax may not be included in the package. Robotime says an ordinary candle, a crayon or beeswax can be used instead.

Do I need a 3D printer for these?

No. The parts come pre-cut and you assemble them. If you want to print a prop instead, the PropBuilds print libraries linked below list files for 190 franchises.

Has PropBuilds built these kits?

No. PropBuilds makes 3D printed prop kits and has not built a ROKR or Rolife kit. The details on this page are the ones Robotime publishes on its own product pages, read on November 17, 2026.

Why are there no prices on this page?

Robotime changes its prices and offers often, so they are not copied here. Each card opens the live product page, where the current price is shown.

Keep looking