// Contents
PropBuilds earns a commission if you buy through links on this page, at no extra cost to you.
The most-liked Elden Ring file to 3D print is Kijai's Ranni the Witch, with 1,012 likes and 5,841 downloads on Printables. Fotis Mint Studios' Malenia bust is second, and Perry's fillable Pot Boy is third.
How we ranked them. The PropBuilds Elden Ring print library lists 108 files, all on Printables. We read every one live on October 1, 2026 and ranked them by likes. Every note comes from the designer's description.
The ten most-liked Elden Ring files
| # | File | Likes | Downloads | License | Good to know |
|---|---|---|---|---|---|
| 1 |
Ranni the witch by Kijai |
1,012 | 5,841 | CC BY-NC-ND | Ranni the Witch, printed in resin and painted with acrylics; prints fine on FDM too |
| 2 |
Malenia Bust - Elden Ring by Fotis Mint Studios |
796 | 5,395 | Printables standard | A bust of Malenia; the resin files come pre-supported |
| 3 |
Elden Ring Pot Boy by Perry |
201 | 1,295 | CC BY | Pot Boy remixed into a fillable pot |
| 4 |
Albinauric - Elden Ring by Dante Zuck |
190 | 1,104 | CC BY-NC-ND | A pre-supported sculpt of a second-generation Albinauric |
| 5 |
Vyke Elden Ring Statue by BlubberDylan |
135 | 1,142 | CC BY | Finger Knight Vyke as a statue; mind the orientation and supports |
| 6 |
Elden Ring pendant (unofficial) by CrossPathMotion |
133 | 1,021 | CC BY | A pendant inspired by the Elden Ring logo, about 8 cm |
| 7 |
Hand of Malenia - Dummy 13 Sword by Steven La |
133 | 682 | Printables standard | Malenia's prosthetic-arm blade, scaled for the Dummy 13 figure |
| 8 |
Radahn's Starscourge Greatsword - Dummy 13 Sword by Steven La |
131 | 607 | CC BY-NC-ND | Radahn's Starscourge Greatsword, scaled for the Dummy 13 figure |
| 9 |
Elden Ring Coasters by Strider Varun |
116 | 457 | CC BY-NC-SA | Coasters for the Golden Order, the Two Fingers, the Haligtree and more |
| 10 |
Ranni the witch - Elden Ring - low poly by Das Gold |
115 | 783 | CC BY-NC | A low-poly Ranni |
Likes and downloads are Printables' counts on October 1, 2026. CC BY-NC files are free for personal prints but not for selling prints; ND files can't be remixed and shared, and Printables' standard license doesn't allow reposting.
Figures and busts
Kijai printed Ranni on an Elegoo Saturn and painted her with brush and acrylics, but says she prints fine on FDM too; NEMO-MK2's Ranni has FDM files with built-in supports (the hat still needs a brim and slicer supports) and DLP files for resin. Fotis Mint Studios' Malenia bust and Dante Zuck's Albinauric come pre-supported. Perry's Pot Boy is a fillable pot. BlubberDylan's Vyke statue needs care with orientation and supports. Paint them with the Army Painter Warpaints Fanatic starter set.
Swords
- ReProps' greatsword is split for printing and needs about 76 inches of half-inch rod.
- 18byte's Sword of Night and Flame (pieces cut in half again and glued) and Mohamed N's Dark Moon Greatsword are CC0.
- ReProps' Black Knife may need sanding or glue to fit.
- For the Dummy 13 figure, Steven La scaled Malenia's blade and Radahn's Starscourge Greatsword.
Big swords print in sections: glue them with gel super glue around a rod, then filler and sandable primer hides the seams before paint.
Masks and helmets
NovaDesign's Malenia helmet is CC0, and KKalem made Ansbach's helmet. The video game Halloween helmets and masks guide has more costume pieces.
Desk and gifts
Zacokalo's message stones carry messages ("Could this be a dog?", "Try fingers but hole"), Strider Varun's coasters cover the Golden Order, the Two Fingers, the Haligtree and more, robotgoat's cracked pot can hold a plant, and CrossPathMotion's pendant is about 8 cm. Saplyng finished their Erdtree Seal by sanding it, wiping gel stain on and off, filling the cracks with oil paint and sealing it with a drying oil. The Elden Ring print library lists all 108 files.
More fantasy game rankings: The Witcher and Skyrim Dragon Priest masks.
FAQ
What is the most popular Elden Ring 3D print?
Kijai's Ranni the Witch on Printables, with 1,012 likes and 5,841 downloads, the most of all 108 Elden Ring files in our index. Kijai printed it in resin and painted it with acrylics, and says it prints fine on FDM printers too.
Is there Elden Ring armor or a helmet to 3D print?
Two helmets: NovaDesign's CC0 Malenia helmet and KKalem's Ansbach helmet.
Can I 3D print a life size Elden Ring sword?
ReProps' greatsword is split for printing and needs about 76 inches of half-inch rod inside. 18byte's Sword of Night and Flame and Mohamed N's Dark Moon Greatsword are CC0.
What Elden Ring prints are fun gifts?
Zacokalo's message stones carry messages like "Could this be a dog?", Strider Varun's coasters cover the factions, and Perry's Pot Boy is a fillable pot.
As an Amazon Associate I earn from qualifying purchases. The Amazon links on this page are affiliate links: check the current price and details on Amazon before you buy.
PropBuilds is a fan-run site, not affiliated with or endorsed by the studios or rights holders of the games mentioned.
Header photo: Erdtree Seal by Saplyng on Printables, licensed CC BY; cropped, with an overlay added.