// Contents
PropBuilds earns a commission if you buy through links on this page, at no extra cost to you.
The most-liked Hylian Shield to 3D print is m h's full size shield on Printables, with 2,716 likes and 6,906 downloads; its pieces are split small enough for a Prusa MK3. For a quicker build, Adafruit's prints in just two parts with a built-in handle, and jak0lantash's flat remix mounts the printed details on painted MDF.
How we ranked them. The PropBuilds Zelda print library lists 17 Hylian Shield files, all on Printables. We read each one live on October 1, 2026 and ranked them by likes. Every note comes from the designer's description.
The ten most-liked Hylian Shield files
| # | File | Likes | Downloads | License | Good to know |
|---|---|---|---|---|---|
| 1 |
Hylian Shield - Full Size by m h |
2,716 | 6,906 | CC BY-SA | Full size, with the edges and details split small enough for a Prusa MK3 bed; a fully printed backing was added later |
| 2 |
Hylian Shield (From Legend of Zelda - Breath of the Wild) by fasteddy |
413 | 1,884 | CC BY-SA | Breath of the Wild shield made for multi-extruder printers |
| 3 |
Legend of Zelda Hylian Shield Keychain by nerdyviews |
391 | 1,692 | CC BY | A keychain made with filament color changes |
| 4 |
Hylian Shield TLOZ by Raven Van de Werken |
296 | 1,364 | CC BY-NC | Glue on the handles and rivets; the same designer has a Master Sword |
| 5 |
Hylian Shield (Flat) - Full Size by jak0lantash |
260 | 462 | CC BY-SA | A flat remix of the full size shield, built on painted 4 mm MDF |
| 6 |
Link's Hylian Shield by Adafruit |
178 | 790 | CC BY-SA | Over 450 mm long with a built-in handle, in just 2 parts |
| 7 |
Zelda Hylian Shield with Handle (ender 5 +) by maltvat |
165 | 1,040 | CC BY | Scaled up to fill an Ender 5 Plus as a toy shield for the designer's son |
| 8 |
Hylian Shield and Stand MMU by Alexander Hyperbeam |
142 | 382 | CC BY-NC | Painted for multi-material printing, with a new stand |
| 9 |
Switch Game Case Hylian Shield by paceadventureworks |
137 | 454 | CC BY-NC | Holds 10 Nintendo Switch games; 6 x 3 mm magnets hold the lid |
| 10 |
Dummy 13 Master Sword and Hylian Shield by Demothen Designs |
88 | 567 | CC BY-NC | Low-poly sword and shield for the Dummy 13 figure |
Likes and downloads are Printables' counts on October 1, 2026. CC BY-NC files are free for personal prints but not for selling prints.
Full size shields
m h's shield splits the edges and embellishments into pieces that fit a Prusa MK3 bed. A set of files for a fully printed backing was added later; the designer notes they sliced cleanly but hadn't been test printed. jak0lantash's remix makes the shield flat: paint a sheet of 4 mm MDF, print the parts flat in silk silver, silk gold and red PLA, and glue them on. Adafruit's is over 450 mm long, prints in two parts and has a built-in handle. For color straight off the printer, fasteddy's Breath of the Wild shield is made for multi-extruder printers, and Alexander Hyperbeam painted Raven Van de Werken's shield for multi-material printing and added a stand.
Shields with a purpose
- A Switch game case that holds 10 games, with holes for 6 x 3 mm magnets in the case and lid.
- A lock box lid that prints in parts, so no multi-filament printer is needed.
- A controller stand with the Master Sword and Hylian Shield that fits all controller types.
- A keychain done with filament color changes, and a Dummy 13 sword and shield.
- A toy shield that maltvat scaled up for their son.
Finishing
Single-color prints need paint: prime with filler and sandable primer, then paint the blue, silver, gold and red. A gel super glue handles the handles and rivets on Raven Van de Werken's shield. The finishing guide covers the steps, and the Zelda print library has every shield plus the Master Sword and Majora's Mask files.
More Zelda rankings: the Master Sword and Majora's Mask.
FAQ
What is the best Hylian Shield to 3D print?
By likes, m h's full size Hylian Shield on Printables (2,716 likes, 6,906 downloads). Its edges and details are split small enough for a Prusa MK3 bed.
Can I print a full size Hylian Shield on a small printer?
Yes. m h split the full size shield to fit a Prusa MK3, and jak0lantash's flat remix prints its parts flat and mounts them on a painted sheet of 4 mm MDF, which is easier to build.
Is there a Hylian Shield with a handle?
Adafruit's shield is over 450 mm long, prints in just 2 parts and has a built-in handle; maltvat scaled a version with a handle up to fill an Ender 5 Plus.
What else can I print shaped like a Hylian Shield?
A Nintendo Switch case for 10 games, a keychain, a lock box lid, a controller stand with the Master Sword, and hoodie or shoe beads.
As an Amazon Associate I earn from qualifying purchases. The Amazon links on this page are affiliate links: check the current price and details on Amazon before you buy.
PropBuilds is a fan-run site, not affiliated with or endorsed by the studios or rights holders of the games mentioned.
Header photo: Link's Hylian Shield by Adafruit on Printables, licensed CC BY-SA; cropped, with an overlay added. The edited header is shared under the same licence.