Warhammer props, printable.

This printable kit transforms the NERF Fortnite AR-L blaster into a full-scale Bolt Gun prop for 40k cosplay .

Tokens for counting points and CP easier

These are standard 40k pill bases. These have limited uses in the game, but a small set of models do default to this.

Tips for the PLF system to act as lights (Lumens) on the gantry or walls.

A range of circular, oval and rounded rectangle bases sized equal to those produced by Games Workshop.

Card box for Warhammer Underworlds

I needed a chunky gun for a cosplay character. This revolver is modeled after a design by Brexit.

2 thicknesses: 1 and 2 mm It is best to print with a 0.25 layer I recommend 2mm(: (The photo shows 1mm)

For 6 citadel paints and 3 brushes

A set of tokens to be used in the Tabletop Game Age of Sigmar.

Storm bolter for left and right hand

Here are the terrain area footprints for the new 40k 11th Edition rules. These match the exact sizes required for the ne

Waramer ruller

Hand Radio for Warhammer with a small resemblance of WW2 Aesthetics

Fancy 3inch Warhammer Combat Tool

This is intended to be the inside of a Necron vessel during Boarding Actions. The walls are compatible with GW…

Bolter round in 3 calibers

Quick and simple phone stand with Imperial Aquila one the front that I made for my friend for a gift.

Personal modification for Lablasto Scully V2 in WH40k bolter vibe.

Hurricane Bolter frame for the Aegis turret base or Tarantula base. I've provided 4 different shields to protect the…

Trunk and Lid for the chaos and the death faction packs for AOS4

A small kit with 1, 2, 3, 6 and 8 inch. Also a 6 and 8 inch arc ruler and a disembark rule of 3 inch (inside).

Warhammer The Old World base converter configured as movement tray. There are versions for magnets and another for…

An adapter to convert older 20mm square based models to 25mm.

Oath of Moment token for warhammer

Every normal base Warhammer 40k, included both circular and oval bases, with magnet holes.

This insert will allow sleeved cards as well as magnetized miniatures, with a flush fitting box lid.

Warhammer siege wall for battlefield building

Made this for fun, takes a 1/2 rod

A points tracker for Age of Sigmar Spearhead. Points broken down into victory points and battle tactics.

Uses an M3 bolt and nut to hold in place, use on lowest rotary tool speed PLA works fine preferred ASA (and successful)

Holder for warhammer underworlds game pieces

A box large enough to hold a deck of cards for Warhammer Underworlds in Dragon Shield sleeves.

Purge heretics or just mow your lawn with this big chainsword

A simple organiser to house all parts of the new SoG GHB for Age of Sigmar

Hey there Tribe, We have used this logo before on my Inquisitor Blackheart Cosplay, so we added it to the magazine to…

An overengineered battle box for Age of Sigmar which stores all you need for a game and doubles as a dice tray

Adeptus Mechanicus faction board game pieces for the Forbidden Stars board game.

Remix of VoyMakesMinis' Necron Obelisks (or Objective Markers), hollowed out to take an LED and watch battery.

Miniature box Token box Deck box

A 32mm base to field your warriors on!

Remixed to remove the need to pause printing to change filaments for multi material printers.

Detailed pipeline prop

Custom dice cup inspired by Warhammer 40k Tau

Standard 40mm round base for tabletop wargames like Warhammer 40k & AoS. Print-ready, sturdy 4mm height. Supports-free.

A board that allows you to track score for the 4th edition of Age of Sigmar using D6s

Although most of the Imperium's (and other race's) structures are bulky and over-engineered, often initial structures,…

Simple exhausts for the doom scythe and night scythe.

I didn't like objective markers I found elsewere, because I think they're too thick. These are very thin and flexible.

Mechanical legged base for Adeptus Mechanicus Warhammer 40000 figures

An over-engineered foldable ruler for Warhammer 40K 11th edition

This collection contains printable terrain area footprints compatible with the official Warhammer 40,000 terrain footpri

Terrain Area Footprint Shapes for Warhammer 40K 11th Edition

Remix of a basic ruler to give it a Necron theme

Keeps Kill Team 2024 tokens attached to the mini they're pointing at, with a low profile and the ability to rotate them.

Tokens para marcar las declaraciones de carga y las huidas de unidades en warhammer, o cualquier otro juego.

AoS scourge of ashqy 2026-2027 general's handbook tracker for vp, cp, fury level and rage dice. Uses d10 dice for vp.

A chainsword - melee in zombie stories, roblox

I've been looking for some nice looking stand for my minis and I've found one designed for ThomPerry63. It was…

This is an end cap designed to cover the ends of the standard aluminum profiles that come with the Creality Ender-3 Pro.

An Age of Sigmar (3rd edition) Mysterious Terrain dice/marker

Little business card holder, must have on any warhammer fun's table.

Miniature Bases 32mm (Warhammer 40k etc.)

Some square bases I made to play Warhammer The Old World

A remix of the epic chainsword miniature from Cornivius, The Teeth of Terra, into a life-size multi part prop!

An adapter to convert older 25x50mm square based models to 30x60mm.

Base with inset for 10mm magnets to be used with floating tank units.

Use the New round base figurines in old square base games.

as described... :)

A remix of the awesome Big Guns from Terrain4Print with Magnetslots

A Cavalry troop tray / base for Kings of War that allows you to use miniatures with Age of Sigmar Cavalry Bases (35mm…

Craft precise, patterned clay base toppers with ease using this specialized cutter! 🌟

Miniature Bases 40mm (Warhammer 40k etc.)

Fits into empty space at the bottom of the miniature. Fillings have embedding for 3 or 5mm x 1mm magnet.

Nice tool to store brushes and paint with a working area

Hey there Tribe, We made this in case you ever wanted to pose with a reload for your warhammer 40k cosplay, also great…

Objective Marker for Warhammer 40k and AoS

This box holds a standard set of 168 Cards for "Munchkin" card games from Pegasus Spiele and a die.

Dynastic plates for the Necron Ziggurat or to be used in scratch built Necron structuresNecron Ziggurat (large) can be…

Square/rectangular miniature bases, with optional slots compatible with 1980s-2000s Warhammer.

Used to sort, organize, and transport models such as Warhammer models that have 32mm round bases

120x90 oval flying base with slot to allow for disassembly of flying stand.

A collection of Adeptus Mechanicus keychains based on the Icon Mechanicus from Warhammer 40K by Games Workshop

A magnetic movement tray for 32mm bases

A simple combat tool for warhammer.

Although most of the Imperium's structures are bulky and over-engineered, often initial structures, be it on a new…

Tyranid faction board game pieces for the Forbidden Stars board game. I also include the mat and additional faction…

Age of Sigmar Spearhead Points Tracker With Twist Column

Terrain suitable for upgrading your Warhammer Underworlds experience. Remix of great models by medicationforall.

Atmos cover in the style of Adeptus Mechanicus from Warhammer 40k

Hello Tribe, We had give to you the Jupiter pattern Drum magazine for you Jupiter Pattern Bolt pistol Here is our…

3-inch radius objective markers - no arguing about a mm here or there!

An over-engineered foldable guage for use in Warhammer 40K.

Dont want to rebase your army? You dont have to.

Compteur de tours (5 tours) pour partie de Warhammer 40K.

Help speed up your WH40k or AoS games with this little gauge. Add a color change to help it stand out on your games!

A basic way of marking stat changes from spells, special abilities, etc 12mm dice holder can be for wounds as well.

6 inch and 9 inch rulers to be used as combat gauges for tabletop war games like Warhammer or Age of Sigmar.

A large Necron Ziggurat as seen in White Dwarf Magazine. The roof top was inspired by the Space Wolf video game. Can…

Warhammer 40.000 - Warhammer Age of Sigmar dice marker This is a easy to print Warhammer wound marker for Warhammer

Just a generic army tray for the warhammer figurines with a 20mmx20mm base

Standard 80mm round base for tabletop wargames like Warhammer 40k & AoS. Ideal for monsters. Print-ready, sturdy 4mm hei

This insert will allow sleeved cards as well as magnetized miniatures, with a flush fitting box lid.

Printed as a single flat piece The model can be scaled up or down it is a Warhammer symbol hope you enjoy it thank you.

A stand for pewter Warhammer minis. Both versions are the same dimensions as the original 20mm X 20mm X 3mm(LWH), with…

Inquisition Insignia inspired by that of Space Marine 2

DIY 3D-printed Tabletop LED-Objective-Marker for WARHAMMER 40k etc.

Warhammer 40k Tyranid Hive

A Movementruler Set with Army Icons. Designs and names are credited to Games Workshop.

A Rosette showing status as an Inquisitor working above and beyond the Imperium of mankind to protect itself from the…

Triarch Stalker gun mount to allow all 3 weapons to be magnetized.I include a sliced version for easier printing. Make…

This is a remixed model of the original so you guys can also fit halls of terra , in the same box

Hello Tribe, A replacement magazine for the Jupiter Pattern Bolt Pistol we released thanks for watching Here is our…

These are simple moving trays I designed for One Page Rules' Age of Fantasy: Regiments tabletop wargame. They are for…

Adeptus Mechanicus bookmark. Can be printed at 75% height scale if you want a slimmer bookmark.

Turn your Lords into Overlords with Translocation Shrouds with this upgrade kit.The Translocation shroud is better…

A board to use d6 dice to track victory points and battle tactics for Age of Sigmar.

Here is a collection of movement trays for minis from older Warhammer bases to the new larger format.

Small 2x12mm D6 dice holders for keeping track of wounds remaining for your models.

Warhammer Fantasy movent trays adapted for the new standard base size of The Old World.

Cosplay Shoulder Boards with Imperial Aquila

Modular storage for Kill Team Compatible with 40mm and 30 mm bases. Uses either 6x3 or 6x2 magnets

Simple measuring sticks for Warhammer 40k.

Hello Tribe, We again present you with a Jupiter pattern drum magazine but this time it is a reload prop. Here is our…

Slapped an AdMech logo on the front of this bad boy. This is the airflow model.

7.57'' objective marker for the Warhammer 40k tabletop game

A tool to draw a 45 degree line from a square model base

3x Model Squad Base for 90mm GW Ovals. Specifically designed to work with bike troopers, but may work w/others.

Portable Heavy Bolter for a Heavy Weapons Squad.

My friend needed a combat key for his campaigns so I designed and printed a bunch of these!

Remix of the bases to fit the old version of Warhammer Fantasy (now The Old World).

My own design for an overengineered transport box for Warhammer miniatures. All modular and stackable. Work in progress!

Icon-Designs and names are credited to Games Workshop.

Compatible with the cards for 'Fire & Jade', 'Sand & Bone', and 'City of Ash'. Divider during play. Holds Twist card.

a replacement lock for a storage box for the Warhammer wargame.

40mm marker with 3 inch circle. Icon-Designs and names are credited to Games Workshop.

Little movement tray i made for my unit of 10 chaos warriors. Size is fitted for 32mm base, can be easily resized.

Socles wargame : 25 mm, 25 ovale, 28 mm, 32 mm, 40 mm, 50 mm, 60 mm, 90 mm. Fichiers 3D pour figurines typ

Paint rack to hold your colours when painting small figures like Citadel paint

A modell which helps sort your colours and the holder for wather and brush.

Holds 3 "men" so you can move them at the same time. It has a tab to make it easier to grab

Terrain set for matched play games of Warhammer 40k - 11th edition. No Supports, Layer-based Multicolor with inserts.

Small, Large, and Flamer templates.

Collection of Warhammer ground bases. Validated against real GW bases, getting more complete by the day.

Basic tokens I designed for admech warhammer 40k

Hold up to 12 dice of either 12mm or 5/8 (or of course, any size smaller than the 13mm slot version or 17.1 mm slot one)

a gauge to mesure distances at tapletop wargames

Box set came missing one base, so I threw this together real quick.

Clay cutter that produces Warhammer 40K and Age of Sigmar-compatible bases. All common base sizes included.

Necron faction board game pieces for the Forbidden Stars board game. I also include the mat and additional faction…

A candle holder in 40K style.

Little movement tray i made for my unit of 3 chaos knights. Size is fitted for 75mmx42mm base, can be easily resized.

Necron Power Node obelisks. These fit the 3 Necron Power Node bases.Partially inspired by Space Wolf video game.Bases…

Track your fury level and rage dice in your games of Age of Sigmar in the General's Handbook 2026-27. Made for 16mm dice

Large Infantry Horde Movement tray / base for Kings of War that allows you to use miniatures with Age of Sigmar / 40mm…

Necron Power Node structure intended as terrain made from a 525ml (17.8 oz) tin can. This can be wired for light.

Grimdark base for miniatures

This is a modular caddy/organiser system for tabletop wargaming. These files are a work in progress.

Safeekeep your troops!

40k plasma pistol consisting of five parts for easier printing