// Contents
PropBuilds earns a commission if you buy through links on this page, at no extra cost to you.
The most-liked Terminator file to 3D print is RandomFilament's T-800 armor for the Dummy 13 figure, with 2,780 likes and 9,793 downloads on Printables, almost three times the next file. LayerLux3D's life-size arm lamp is second, and T-800 skulls fill most of the rest.
How we ranked them. The PropBuilds Terminator print library lists 159 files, all on Printables. We read every one live on October 1, 2026 and ranked them by likes. Every note comes from the designer's description.
The ten most-liked Terminator files
| # | File | Likes | Downloads | License | Good to know |
|---|---|---|---|---|---|
| 1 |
Dummy 13 - Terminator T800 Armor by RandomFilament |
2,780 | 9,793 | CC BY-NC-SA | T-800 armor for the Dummy 13 figure, the most-liked and most downloaded file in the library |
| 2 |
DIY Life-Size Terminator Arm Lamp by LayerLux3D |
972 | 3,427 | CC BY-NC | A life-size Terminator arm lamp with a stand, cleaned up from nracmo's design |
| 3 |
Lucky 13 T800 head by Crazy3D |
665 | 3,239 | CC BY-NC-SA | A T-800 head for the Lucky 13 figure; the fine details are hard with a 0.4 mm nozzle |
| 4 |
T800 Smooth Terminator Endoskull Printable WithBase (not Exo by Spank |
568 | 3,961 | CC BY-SA | A smooth T-800 endoskull on a base, no supports |
| 5 |
Alexa Echo Dot (4th Gen) T800 by Jeff Lundstrom |
407 | 3,389 | CC BY | A T-800 head cut to hold a 4th gen Echo Dot, remixed from Geoffro's |
| 6 |
Terminator Pencil Holder by Mcginnis83 |
405 | 3,811 | CC BY-SA | A Terminator skull pencil holder |
| 7 |
Terminator T800 Split Shoulders "Bust Concept" by Jace1969 |
377 | 2,156 | CC BY-NC-SA | A T-800 bust with split shoulders, built from several components |
| 8 |
Terminator 2 T-800 CPU by MakerSteve3D |
189 | 1,236 | CC BY-NC | The T-800 CPU from the Terminator 2 extended edition |
| 9 |
Terminator T-800 memorial coin by Grafit |
134 | 789 | CC BY-NC-SA | A fictional T-800 memorial coin, best in resin |
| 10 |
Terminator Arnold Head for dummy 13/Lucky 13 by Power Jojo |
129 | 1,006 | CC BY | An Arnold head for Dummy 13 and Lucky 13 |
Likes and downloads are Printables' counts on October 1, 2026. CC BY-NC files are free for personal prints but not for selling prints; ND files can't be remixed and shared, and Printables' standard license doesn't allow reposting.
T-800 skulls and busts
- Spank's smooth endoskull prints on its base with no supports (CC BY-SA), and Radim's version adds room for 2 AA batteries, a switch and LEDs (CC0).
- Jace1969's bust grew split shoulders and hands, CrashOverride's remix adds three primary color accents, and Gdprint73's bust is CC0.
Prime skulls with filler and sandable primer and paint with the Army Painter Warpaints Fanatic starter set. They make good Halloween decor too; see the horror movie props ranking.
Props: the arm, the CPU and more
LayerLux3D's life-size arm is a lamp with its own stand. MakerSteve3D's T-800 CPU is the one from the Terminator 2 extended edition, and ICE's Cyberdyne CPU stand needs a 45 x 2 mm plexiglass tube, 110 mm long. Ludiks' T-800 ring is 68 mm around, so resize it (CC BY), Grafit's memorial coin is best in resin, and peto.r_'s Terminator with a minigun stands about 20 cm (CC BY). Glue multi-part props with gel super glue.
Figures, desk pieces and gifts
For jointed figures, RandomFilament's armor fits Dummy 13, Crazy3D's T-800 head fits Lucky 13, and Power Jojo's Arnold head fits both (CC BY). Jeff Lundstrom's T-800 head holds a 4th gen Echo Dot (CC BY), Model_Citerzen's T-800 container prints without supports and its lid clicks shut (CC BY), Mcginnis83's pencil holder is CC BY-SA, PrintVision's skull holds a 0.33 L can, Spaceman Spiff's large Terminator minifig is CC BY, and Neo Kerman's Cyberdyne Systems sign hangs on the wall. The Terminator print library lists all 159 files.
More sci-fi rankings: Alien, Star Trek and Transformers.
FAQ
What is the most popular Terminator 3D print?
RandomFilament's T-800 armor for the Dummy 13 figure on Printables, with 2,780 likes and 9,793 downloads, the most of all 159 Terminator files in our index.
Can I 3D print a T-800 skull?
Yes. Spank's smooth endoskull prints on a base with no supports (CC BY-SA), Radim's version takes 2 AA batteries, a switch and LEDs (CC0), and Gdprint73's bust is CC0.
Is there a Terminator arm to print?
LayerLux3D's life-size Terminator arm is a lamp with its own stand, cleaned up from nracmo's design.
What Terminator gifts can I print?
Jeff Lundstrom's Echo Dot T-800 head (CC BY), Model_Citerzen's T-800 container with a clicking lid (CC BY), pencil holders, a 0.33 L can holder, Ludiks' T-800 ring (CC BY) and Grafit's memorial coin.
As an Amazon Associate I earn from qualifying purchases. The Amazon links on this page are affiliate links: check the current price and details on Amazon before you buy.
PropBuilds is a fan-run site, not affiliated with or endorsed by the studios or rights holders of the games mentioned.
Header photo: T800 Smooth Terminator Endoskull by Spank on Printables, licensed CC BY-SA; cropped, with an overlay added. The edited header is shared under the same licence.