// Contents
PropBuilds earns a commission if you buy through links on this page, at no extra cost to you.
The most-liked Roblox file to 3D print is n1ck87's two-color logo keychain, with 629 likes on Printables, made for their niece. PiotrRago's two-sided Robux coin is the most downloaded, and for figures, Ureleed Records' Noob ragdoll prints in place with no supports or glue.
How we ranked them. The PropBuilds Roblox print library lists 286 files, all on Printables. We read every one live on October 1, 2026 and ranked them by likes. Every note comes from the designer's description.
The ten most-liked Roblox files
| # | File | Likes | Downloads | License | Good to know |
|---|---|---|---|---|---|
| 1 |
Roblox keychain by n1ck87 |
629 | 5,765 | CC BY | A two-color Roblox logo keychain, made for the designer's niece |
| 2 |
Roblox Robux Coin 2 sideded remix by PiotrRago |
402 | 6,280 | CC BY-NC-SA | A two-sided Robux coin, the most downloaded Roblox file in our index |
| 3 |
Roblox figure by 3D_Pi |
282 | 5,786 | CC0 (public domain) | A Roblox figure taken from Roblox Studio; CC0 |
| 4 |
Roblox Logo by BTR3D |
238 | 2,683 | CC BY-NC | A Roblox logo for a shelf, in two parts |
| 5 |
Roblox Knife by MrSquishyMuffin |
237 | 2,452 | CC BY-SA | The knife from Roblox |
| 6 |
Keychain - Roblox by Reithsters |
159 | 1,439 | CC BY-NC-ND | A layered logo keychain whose bottom layer and text can be different colors |
| 7 |
Roblox Bacon Skin by samsung_capybara |
143 | 3,765 | CC BY-NC | The Bacon skin, Roblox's standard look; about 4 hours to print |
| 8 |
Roblox Noob Ragdoll Figure Print-In-Place (NO AMS) by Ureleed Records |
130 | 2,194 | Printables standard | A Noob ragdoll that prints in place, with no supports or glue |
| 9 |
Articulated Roblox Figure Male/Female by FanBlox Company |
122 | 2,002 | CC BY | An articulated R6 figure, male or female; PETG with tree supports |
| 10 |
Kitsune Roblox Fruit by gbombadon |
115 | 3,144 | CC BY-NC | The Kitsune fruit from Blox Fruits, in two parts with no supports |
Likes and downloads are Printables' counts on October 1, 2026. CC BY-NC files are free for personal prints but not for selling prints; ND files can't be remixed and shared, and Printables' standard license doesn't allow reposting. The Roblox logo is a trademark, so check before selling any print of it.
Keychains, coins and logos
n1ck87's keychain prints in two PLA colors, and Reithsters' is built in layers so the bottom and the text can be different colors. PiotrRago's Robux coin is two-sided, and BTR3D's shelf logo is two parts (a dab of gel super glue if they don't fit tight).
Figures and characters
- 3D_Pi's figure came from Roblox Studio and is CC0, and samsung_capybara's Bacon skin takes about 4 hours.
- Ureleed Records' Noob ragdoll prints fully assembled with moving joints.
- FanBlox Company's articulated R6 figures come male and female; they print best in PETG with tree supports. The same designer has Forsaken's 1x1x1x1 and Gourdy from Dandy's World.
- From the horror games: El Goblino from DOORS (no supports, the head turns), DOORS' Figure, Gubby the killer rabbit, and the Deer from 99 Nights in the Forest, which is best printed at full size or larger because the fingers are thin.
Paint single-color figures with the Army Painter Warpaints Fanatic starter set.
Blox Fruits, Grow a Garden and lamps
gbombadon modeled the Kitsune fruit because their son begged them to; it comes in two parts with no supports, and their Mammoth fruit needs tree supports only for the ears and antenna. HGiv's Grow a Garden mango plugs together, and their candy blossom is about 55 mm tall. For a bedroom, jurassic73's light sign has an LED strip behind a diffuser, four 20 mm M3 screws and slots for 1 cm magnets, and BadKarma's light box uses an IKEA Vattensten LED strip. The Roblox print library lists all 286 files.
More game rankings for kids: FNAF, Super Mario and Pokemon.
FAQ
What is the most popular Roblox 3D print?
n1ck87's Roblox keychain on Printables, with 629 likes, made for their niece. PiotrRago's two-sided Robux coin is the most downloaded (6,280) of all 286 Roblox files in our index.
Is there a Roblox figure to 3D print?
Yes. 3D_Pi's figure from Roblox Studio is CC0, Ureleed Records' Noob ragdoll prints in place with no supports or glue, and FanBlox Company's articulated R6 figures (plus Forsaken and Dandy's World characters) print best in PETG with tree supports.
What Roblox prints can kids help make?
Keychains, the Robux coin and the logo are small, simple prints. The Bacon skin takes about 4 hours. HGiv's Grow a Garden mango and candy blossom and gbombadon's Blox Fruits are small toys that designers made for family.
Is there a Roblox lamp?
jurassic73's light sign uses an LED strip behind a diffuser and four M3 screws, with magnet slots in the base, and BadKarma's light box uses an IKEA Vattensten LED strip.
As an Amazon Associate I earn from qualifying purchases. The Amazon links on this page are affiliate links: check the current price and details on Amazon before you buy.
PropBuilds is a fan-run site, not affiliated with or endorsed by the studios or rights holders of the games mentioned.
Header photo: Roblox keychain by n1ck87 on Printables, licensed CC BY; cropped, with an overlay added.