HEART OF CHORNOBYL / THE ZONE ON YOUR DESK

STALKER 2 3D print files,
props and replicas.

The Zone's props scene is almost entirely printed. Detectors, artifacts, mutants and faction gear exist as free STLs long before anyone sells a finished one, so this page leads with the files and keeps the short list of real merchandise honest. 101 curated print models and 7 verified props, each checked against its source page or seller.

COST OF HOPE The Cost of Hope expansion and the free Update 2.0 both released on August 20, 2026, per the game's own Steam store pages.
Zone birthday S.T.A.L.K.E.R. 2 launched November 20, 2024. The anniversary comes round every November 20. Nov 20 Start here The Echo detector is the one Zone print everyone makes first, and it fits in a hand See it
// PHYSICAL PROPS Ready Made Props 7 verified listings, stock checked Shop the props // PRINT FILES STALKER 2 Print Files 101 curated STLs, almost all free Browse the models

Be straight about what exists. There is no licensed replica line for S.T.A.L.K.E.R. 2, no official prop store and no Funko, so the finished market is small: an official Dark Horse artbook, the game itself, embroidered faction patches from independent makers, and two 1:35 and 1:16 resin figures from SPALAH, a Ukrainian model kit maker. The printed side is where the Zone actually lives. Detectors are the entry point because the Echo is a hand sized box with a hinged lid and a screen, the Gauss rifle is the flagship weekend build, and the mutants print as tabletop scale miniatures. Cost of Hope has just added the Chornobyl NPP and the Iron Forest to the map, so expect the model pages to follow.

// IN STOCK TODAY
The Art of S.T.A.L.K.E.R. 2: Heart of Chornobyl hardcover artbook The Art of STALKER 2 The official Dark Horse hardcover, and the best reference on this page if you are painting a detector or scaling a mutant. In stock SPALAH 1/35 Resting Stalker resin figure kit Resting Stalker, 1/35 Unpainted resin figure from SPALAH, made in Ukraine. A stalker on a crate with his rifle across his knees. Low stock SPALAH 1/16 Scientist SSP-99 Ecologist resin figure kit Ecologist SSP-99, 1/16 The larger SPALAH kit: a scientist in the sealed SSP-99 suit holding a detector. Also unpainted, also Ukrainian made. Low stock Complete set of S.T.A.L.K.E.R. faction patches Complete Faction Patch Set Every faction as an embroidered hook and loop patch in one set. Fan made, and the fastest way to dress a plate carrier for a cosplay. In stock Duty faction embroidered patch Duty Faction Patch The red and black Duty crest on its own, hook and loop backed. Pick a side before you buy the set. In stock S.T.A.L.K.E.R. 2 Heart of Chornobyl PlayStation 5 box The game, on PS5 The physical PlayStation 5 edition, for the shelf next to the artbook. The console port arrived a year after PC. In stock

Six Amazon listings, each opened and its availability block read on August 26, 2026. Two SPALAH kits showed only a few units left at the time, hence the low stock tags. Prices move on Amazon without warning, so none are quoted here: check the current price on the listing itself. As an Amazon Associate I earn from qualifying purchases. The Ward faction patch is in the props catalog too, but with eight left it did not make this list.

// SIX WORTH PRINTING
Printed and weathered S.T.A.L.K.E.R. Echo detector held in a hand, lid open Echo Detector The most downloaded Zone file we track, and the photo is a finished, weathered build with the lid open and the lamp lit. Printables / free / by DoctorZer0 Painted yellow Echo detector print, open on a dark surface Echo Detector, painted A second take on the same device with a cleaner, brighter finish. Compare the two before you pick a colour scheme. Printables / free / by qqq Printed Gauss rifle laid out on grass with a stalker loadout of masks and detectors Gauss Rifle, full loadout A full size Gauss rifle photographed on the grass with the rest of a stalker kit. Sectioned print, a proper weekend. Printables / free / by horvaticus Snork mutant miniature crouched on a round base Snork Mutant Tabletop scale mutant on a base, gas mask and all. The same maker has a Burer and a zombie stalker to go with it. Printables / free / by 3DCraft Printed hooded stalker figurine holding an artifact Stalker Figurine A hooded loner holding an artifact, shown as an actual resin print rather than a render. There is a second pose by the same maker. Printables / free / by Jakub Painted stalker figure in gas mask and camouflage, kneeling with rifle Stalker Character, painted The most printed Zone figure on MakerWorld, 357 completed builds at the time of checking. This one is a paid file, the only one on this list. MakerWorld / paid / by TinyMaker

Six files by six different makers, every link opened and confirmed live on August 26, 2026 with its download count read off the source page. Others were passed over on visual review: a Gauss gun and an exoskeleton shown only as CAD renders, a statue shown as a slicer screenshot, and a card storage box whose listing image was AI generated rather than a photograph of a print. The 60 or so Cults3D models in the catalog could not be re-verified this run, so none are featured here.

// WHAT TO PRINT
Detectors Echo, Bear and Veles. Hand sized, hinged, and the reason most people arrive here. Add an LED and a switch and it reads as real. Artifacts Weird Balls, Flashes and Slugs. Small, round, easy in clear or glow filament, and they look right sitting inside a printed detector. Weapons The Gauss rifle is the flagship, printed in sections around a spine. Pistols and the PDA are the quicker options. Mutants and stalkers Snorks, Burers, Bloodsuckers and hooded loners at tabletop scale. Resin prints best; FDM works at 150 percent. Desk pieces Logo plaques, coasters, bookmarks and card boxes for the collectible cards. An evening each, no supports. Rather not print? 7 finished pieces: the official artbook, SPALAH resin kits, faction patches and the game itself, with stock checked.
// HOW LONG IT TAKES
An evening An artifact or two, a logo plaque, a bookmark. Small parts, one colour, straight off the bed.
A weekend An Echo detector with the hinge fitted and a coat of yellow, or a set of mutant miniatures ready for primer.
A week of evenings A detector with a working LED and switch, weathered to match the artbook. The electronics are simple; the weathering is where the time goes.
A proper project The full size Gauss rifle. Sectioned prints, a rod down the middle, filler, sanding and paint. Plan where it hangs before you start.
The whole loadout Rifle, detector, a pouch of artifacts and a plate carrier dressed with the patch set above. This is where printing and buying stop competing and start sharing a costume.
// STAY IN THE LOOP

New models, new finds.

Join the PropBuilds email list for new prints and prop finds across the games we cover, S.T.A.L.K.E.R. 2 included. No spam, and we do not fire off automatic alerts you did not ask for.

// FAQ
Where can I download S.T.A.L.K.E.R. 2 STL files?
Fan made Zone models live on Printables, MakerWorld and Cults3D. The STALKER 2 print files directory pulls the good ones into one curated list of 101 models, and every card links straight to the source page where you download the file. Almost all of them are free; paid files carry a badge. PropBuilds does not host STLs and does not paywall anything. Files do get reworked or pulled by their creators, so treat every link as fan made and subject to change.
What is the easiest S.T.A.L.K.E.R. 2 thing to 3D print?
An artifact. The Weird Ball is a sphere with a groove, prints in one piece, and looks right in translucent or glow in the dark filament. The next step up is the Echo detector: a small box with a hinged lid, a screen recess and a lamp, which most makers print in two or three parts and paint yellow. Mutant miniatures need a resin printer or a patient FDM setup at larger scale. The Gauss rifle is the deep end and is printed in sections around a rod.
Can I 3D print S.T.A.L.K.E.R. 2 items, and can I sell them?
GSC Game World publishes Fan Content Creation Guidelines that are generous about making things and strict about selling them. The guidelines say that if you follow them "you may create almost anything of your imagination", and then state: "Do not use your fan content for commercial purposes. You are expressly prohibited from exploiting our games for any commercial purpose, unless explicitly permitted otherwise." Unlike Jagex or Mojang, GSC does not mention 3D printing by name, so personal prints sit in the same tolerated space as any other fan art, and selling prints falls under the general commercial ban. This is a summary, not legal advice, and PropBuilds is not a law firm.
Where can I buy S.T.A.L.K.E.R. 2 props and replicas?
Honestly, there is not much, and anyone claiming a licensed replica line is wrong. The official items are the Dark Horse artbook, The Art of S.T.A.L.K.E.R. 2: Heart of Chornobyl, and the game's physical editions. Beyond that the market is independent makers: embroidered faction patches, and the SPALAH resin figure kits made in Ukraine. Amazon has almost nothing else that is actually about the game, and most of what a search turns up is real world Chernobyl memorabilia, which is not a game prop and is not listed here. The STALKER 2 props catalog holds the 7 listings we could verify.
Is there a S.T.A.L.K.E.R. 2 update or event coming up?
The big one just landed. The Cost of Hope expansion and the free Update 2.0 both released on August 20, 2026, which is the date printed on the expansion's own Steam store page. Cost of Hope adds the Chornobyl NPP and Iron Forest regions. The game itself launched on November 20, 2024, so the anniversary falls every November 20. As of the day this page was checked GSC had published no dated future update, no second expansion date and no anniversary event, so none of those appear here.
Are the faction patches and figures official?
No, and the listings do not claim to be. The patches and the SPALAH kits are fan made by independent makers. The only officially licensed items on this page are the Dark Horse artbook, produced with GSC Game World, and the game itself. PropBuilds is not affiliated with GSC Game World and makes no licensing guarantees on anyone's behalf; read each seller's own wording before you buy.

PropBuilds is an unofficial fan project and a community reference. S.T.A.L.K.E.R. 2 is a registered trademark of GSC Game World Global Ltd, and all S.T.A.L.K.E.R. assets, names and imagery are copyright GSC Game World Global Ltd. This page is not affiliated with, endorsed by, or sponsored by GSC Game World. Fan made models and replicas link back to their original creators and sellers, and licensed items are identified by their seller's own wording. Questions or corrections: contact@propbuilds.com.

STALKER 2 props STALKER 2 print files All game resources